NTP

On Tue, Oct 24, 2006 at 02:28:12PM -0400, Glen R. J. Neff
wrote:
> I would prolly skip the access section 'til you get a
minumum config
> working.
> 
> Go with like:
> 
> server pool.ntp.org prefer
> server time.nist.gov
> driftfile /var/run/ntp.drift

or:

geata2# cat /etc/ntp.conf
server pool.ntp.org prefer
server ntp1.cs.wisc.edu
driftfile /var/db/ntpd/ntp.drift


geata2# ntpq -c rl
assID=0 status=c011 sync_alarm, sync_unspec, 1 event,
event_restart,
version="ntpd 4.2.2p31.1577-o Tue Oct  3
21:44:21 GMT 2006 (2)",
processor="i386", system="OpenBSD/3.8",
leap=11, stratum=16,
precision=-18, rootdelay=0.000, rootdispersion=1.005,
peer=0,
refid=INIT, reftime=00000000.00000000  Thu, Feb  7 2036 
1:28:16.000,
poll=6, clock=c8e8dc7c.dd704ea4  Tue, Oct 24 2006
14:39:56.864, state=1,
offset=0.000, frequency=0.000, jitter=0.004, noise=0.004,
stability=0.000, tai=0


and, Ta Daa!!!

geata2# ntpq -c peers
     remote           refid      st t when poll reach  
delay   offset
jitter
============================================================
==================
 ntp1.us.grundcl 204.123.2.72     2 u   26   64    3  
93.052  35883.9
0.382
 caesar.cs.wisc. 128.105.201.11   2 u   24   64    3  
56.503  35876.7
0.393

> 
> -G


I am VERY encouraged by the "peers" list.


Thank you.  I will let you know what happens after a while.

Brian


_______________________________________________
tribug-members mailing list
tribug-memberstribug.org
http://www.tribug.org/mailman/listinfo.cgi/tribug-membe
rs