Steve Jeppesen wrote:
> On Sun, 31 Dec 2006 10:41:48 +0300
> OOzy Pal wrote:
>
> > Can some one recommend a USB stick that I can
password protect under
> > Linux and Windows?
> >
>
> I just purchased a Kingston U3 DataTraveler 1 gig this
past weekend
> and noticed it had a password/security function built
into it -
> however I am unable to test it in either O.S. right now
as it is at
> my place of business - and I'm not!
>
> h
ttp://www.kingston.com/flash/datatraveler_home.asp
According to their white paper the encryption functions are
windows-only. The dual-mode DTS will work as a plain vanilla
USB thumb
drive as long as you have a public "zone" set up,
and the DTSP won't
work at all under Linux. To be precise the little
compatibility table
says "Not Supported".
I'd say that and fact it's hardware encryption means this is
because
the management/authentication program is windows only. You
*might* get
wine or such to run it, but at that point you're screwing
around so
much in my opinion that you're way better off using another
thumb drive
and Truecrypt. It's almost certainly cheaper, and you can
move the drive
between Win/*nix boxes as long as Truecrypt is installed on
the box
(requires admin privledges which leaves some people out in
the cold at
work, school, etc...)
Note: Truecrypt also has a "treveler mode", but
I'm not familiar with
it so I don't know if it has the same limitations as the
DTS/DTSP
drives above. I believe it also requires admin privledges to
load its
driver on a host machine, so buyer be ware.
> When you plug it in, it mounts two drives, one
"cd-rom" type and
> one for your data. That's for M$ and Linux. I can live
with that.
>
> The "cd-rom" mount doesn't allow you to
delete anything, like a normal
> cd-rom. And according to the instructions, it comes
with preloaded
> "apps" on the data mount that can be deleted
if desired.
This is probably because of some partitioning scheme used to
hold the
authentication application(s) and the data itself. Wild
guess here, but
the "CD-ROM" mount is probably read-only because
of some default
data-protecting NTFS mount. The "data" area of the
drive is likely
formatted fat32 so it's mounts read/write.
--
_?_ Outside of a dog, a book is a man's best
friend.
(o o) Inside of a dog, it's too dark to read.
-oOO-(_)--OOo-------------------------------[ Groucho Marx
]--
grok! Registered Linux user #402208
--
ubuntu-users mailing list
ubuntu-users lists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
|