xserver question

Hi,

I've got a question concerning xorg-xserver and twinview
mode (crt and
tv) on an nvidia gforce 6200.

Up to now I have the following configuration:

xorg.conf:

<snip>
Section "Screen"

    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NV44 [GeForce
6200 TurboCache]"
    Monitor        "ECOMO 750"
    DefaultDepth    24

    Option          "TwinView"
    Option          "TwinViewOrientation"
"RightOf"
    Option          "ConnectedMonitor" "CRT,
TV"
    Option          "HorizSync" "CRT-0:
30-121; TV-0: 30-50"
    Option          "VertRefresh" "CRT-0:
50-160; TV-0: 60"
    Option          "SecondMonitorHorizSync"
"30-50"
    Option          "SecondMonitorVertRefresh"
"60"
    Option          "MetaModes" "CRT-0:
1600x1200, TV-0: 800x600; CRT-0:
1280x1024, TV-0: 800x600;"
    Option          "TVStandard" "PAL-B"
    Option          "TVOutFormat"
"COMPOSITE"

    SubSection     "Display"
        Depth       24
        Modes      "1600x1200"
"1280x1024" "1024x768"
"800x600"
    EndSubSection
</snip>

In order to play a video on the tv set I now have to call
mplayer in the
following way:

mplayer -xineramascreen 0 -stop-xscreensaver -ontop
-geometry 1600:0 
  -noborder -autosync 1 -x 790 -y 570 "$1"

Works ok. But I want to know if the following situation is
possible:

I want to start a separate xserver for the TV set only when
I need it
(and of course to be able to switch it off accordingly). The
important
thing is that this xserver _may not_ influence my xserver
for the crt.

Any help is highly appreciated.

TIA
Dieter





-- 
ubuntu-users mailing list
ubuntu-userslists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

Hi,

just in case someone is interested: I found the solution to
my problem
on http://gentoo-wiki.com/HOWTO_Separate_x-screens
_on_Monitor_and_TV .

Dieter

Dieter Schicker wrote:
> Hi,
> 
> I've got a question concerning xorg-xserver and
twinview mode (crt and
> tv) on an nvidia gforce 6200.
> 
> Up to now I have the following configuration:
> 
> xorg.conf:
> 
> <snip>
> Section "Screen"
> 
>     Identifier     "Default Screen"
>     Device         "NVIDIA Corporation NV44
[GeForce 6200 TurboCache]"
>     Monitor        "ECOMO 750"
>     DefaultDepth    24
> 
>     Option          "TwinView"
>     Option          "TwinViewOrientation"
"RightOf"
>     Option          "ConnectedMonitor"
"CRT, TV"
>     Option          "HorizSync" "CRT-0:
30-121; TV-0: 30-50"
>     Option          "VertRefresh"
"CRT-0: 50-160; TV-0: 60"
>     Option          "SecondMonitorHorizSync"
"30-50"
>     Option         
"SecondMonitorVertRefresh" "60"
>     Option          "MetaModes" "CRT-0:
1600x1200, TV-0: 800x600; CRT-0:
> 1280x1024, TV-0: 800x600;"
>     Option          "TVStandard"
"PAL-B"
>     Option          "TVOutFormat"
"COMPOSITE"
> 
>     SubSection     "Display"
>         Depth       24
>         Modes      "1600x1200"
"1280x1024" "1024x768"
"800x600"
>     EndSubSection
> </snip>
> 
> In order to play a video on the tv set I now have to
call mplayer in the
> following way:
> 
> mplayer -xineramascreen 0 -stop-xscreensaver -ontop
-geometry 1600:0 
>   -noborder -autosync 1 -x 790 -y 570 "$1"
> 
> Works ok. But I want to know if the following situation
is possible:
> 
> I want to start a separate xserver for the TV set only
when I need it
> (and of course to be able to switch it off
accordingly). The important
> thing is that this xserver _may not_ influence my
xserver for the crt.
> 
> Any help is highly appreciated.
> 
> TIA
> Dieter
> 
> 
> 
> 
> 


-- 
Dieter Schicker
Server- und Netzwerkadministration, Applikationsentwicklung,
Lehre
Institut für Informationsverarbeitung in den
Geisteswissenschaften
Karl-Franzens-Universität Graz
Merangasse 70
A-8020 Graz
Tel.: ++43(0)316-380-8012
http://www-gewi.uni
-graz.at/inig/
--
Student of Computer Science
Graz University of Technology
schickerstudent.tugraz.at


-- 
ubuntu-users mailing list
ubuntu-userslists.ubuntu.com
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users