List Info

Thread: problem with mp4play in sip and h324m




problem with mp4play in sip and h324m
user name
2007-03-21 12:53:57
Hello,

I recently got h324m up and running in asterisk 1.4.
Great work btw !
When i make a call from my nokia n70 to an E1, h324m_loop
works fine
and i can also see the video from my camera feeded back to
me. Very
cool. So far so good.

In a next step I tried getting mp4play (and mp4save) to
stream an mp4
to my mobile but i don't see anything appearing on my mobile
and the
call is finished abruptly.
I tried with different hinted mp4 files created with
mp4creator that
seem to play ok on vlc, so i don't think they are the
culprit. I did
try playing video with mp4play through a sip videocall
(xmeeting on
osx), which also does not seem to work.
I'm a bit lost as to why i can't get mp4play to work
correctly ; any
pointers on what i could try next would be much appreciated
!

The h324 context i use for testing is as follows

[videocalltest3]
exten => s,1,h324m_gw(svideo)

[video]
exten => s,1,Wait(4)
exten => s,2,Answer
exten => s,3,Wait(4)
exten => s,4,mp4play(/tmp/video3G/menu1.mp4)
exten => t,1,Goto(s,4)

when i call from my nokia i see the following in the logs

 == Registered application 'mp4save'
 == Registered application 'mp4play'
...
 -- Accepting call from '' to 'xxxx' on channel 0/9, span 1
    -- Executing [xxxxlocal:1] Macro("Zap/9-1",
"gotostuff|videocalltest3") in new stack
    -- Executing [smacro-gotostuff:1]
Set("Zap/9-1",
"dialedphonenb=xxxxx") in new stack
    -- Executing [smacro-gotostuff:2]
Set("Zap/9-1",
"CDR(accountcode)=") in new stack
    -- Executing [smacro-gotostuff:3]
Set("Zap/9-1", "country=") in new stack
    -- Executing [smacro-gotostuff:4]
Set("Zap/9-1", "language=") in new
stack
    -- Executing [smacro-gotostuff:5]
Goto("Zap/9-1",
"videocalltest3|s|1") in new stack
    -- Goto (videocalltest3,s,1)
  == Channel 'Zap/9-1' jumping out of macro 'gotostuff'
    -- Executing [svideocalltest3:1]
h324m_gw("Zap/9-1", "svideo")
in new stack
[2007-03-21 18:05:58] WARNING[7123]: channel.c:627
ast_best_codec:
Don't know any of 0x2000 formats
    -- Executing [svideo:1] Wait("Local/svideo-19c7,2", "4") in new stack
    -- Executing [svideo:2] Answer("Local/svideo-19c7,2", "") in new stack
    -- Executing [svideo:3] Wait("Local/svideo-19c7,2", "4") in new stack
H245 TerminalCapabilitySet TransferRequest
-WriteControlPDU [request]
Encode PDU [95]
Sending CMD [0,87]
H245 Request MasterSlaveDetermination
-WriteControlPDU [request]
Encode PDU [20]
Sending CMD [1,7]
Sending CMD [0] - 1 left
Received SRP_NSRP_RESPONSE [0]
Received SRP_SRP_COMMAND [0]
Sending NSRP [0]
-OnControlPDU [request]
-OnH245Request
H245 Received TerminalCapabilitySet
-Event!!
-WriteControlPDU [response]
Encode PDU [20]
Sending CMD [2,3]
-OnControlPDU [indication]
-OnH245Indication
Unknown Indication
-OnControlPDU [request]
-OnH245Request
H245 MasterSlaveDetermination
-WriteControlPDU [response]
Encode PDU [20]
Sending CMD [3,2]
-Event!!
H245 Request MasterSlaveDetermination
-OnControlPDU [response]
-OnH245Response
H245 Received TerminalCapabilitySetAck
-Event!!
...
Received SRP_SRP_COMMAND [1]
Sending NSRP [1]
-OnControlPDU [response]
-OnH245Response
H245 MasterSlave Ack
-Event!!
H245 H245LogicalChannels Establish Request [1]
-WriteControlPDU [request]
Encode PDU [34]
Sending CMD [4,26]
H245 H245LogicalChannels Establish Request [2]
-WriteControlPDU [request]
Encode PDU [20]
Sending CMD [5,17]
H245 MultiplexEntrySend
-WriteControlPDU [request]
Encode PDU [20]
Sending CMD [6,15]
Received out of order SRP_NSRP_RESPONSE [1]
Received out of order SRP_NSRP_RESPONSE [1]
Received out of order SRP_NSRP_RESPONSE [1]
Received out of order SRP_NSRP_RESPONSE [1]
Received out of order SRP_NSRP_RESPONSE [1]
    -- Executing [svideo:4] mp4play("Local/svideo-19c7,2",
"/var/video3G/menu1.mp4") in new stack
MP4ERROR: FindTrackId: Track index doesn't exist - track 1
type hint
mp4play /var/video3G/menu1.mp4
found hint track 2
track 1 vide
Received SRP_SRP_COMMAND [2]
Sending NSRP [2]
-OnControlPDU [request]
-OnH245Request
H245 H245OpenLogicalChannel received [1]
-Event!!
-OnLogicalChannel
-OnEstablishIndication [1]
-Creating receiving layer [1,1,40d47a50,0,0,4,0]
-WriteControlPDU [response]
Encode PDU [20]
Sending CMD [7,4]
-OnControlPDU [request]
-OnH245Request
H245 H245OpenLogicalChannel received [2]
-Event!!
-OnLogicalChannel
-OnEstablishIndication [2]
-Creating receiving layer [2,2,40d58e20,1,1,3,1]
-WriteControlPDU [response]
Encode PDU [20]
Sending CMD [8,4]
-OnControlPDU [request]
-OnH245Request
H245 MultiplexEntrySend request
Check
request multiplexEntrySend {
        sequenceNumber = 1
 multiplexEntryDescriptors = 2 entries {
          [0]={
            multiplexTableEntryNumber = 1
            elementList = 1 entries {
              [0]={
                type = logicalChannelNumber 1
                repeatCount = untilClosingFlag
<<null>>
              }
       MP4ERROR: MP4Array::[]: index 2 of 2: Numerical
result out of range
     }
          }
          [1]={
            multiplexTableEntryNumber = 2
            elementList = 1 entries {
              [0]={
                type = logicalChannelNumber 2
                repeatCount = untilClosingFlag
<<null>>
              }
            }
          }
        }
      }
-Event!!
-OnMultiplexTable
-WriteControlPDU [response]
Encode PDU [20]
Sending CMD [9,5]
MP4ReadRtpHint failed
  == Auto fallthrough, channel 'Local/svideo-19c7,2' status is 'UNKNOWN'

The sip videocall via xmeeting goes something like this :

-- Executing [1200inbound-from-sip:1]
Answer("SIP/1000-081d9eb0", "")
in new stack
    -- Executing [1200inbound-from-sip:2]
mp4play("SIP/1000-081d9eb0",
"/var/video3G/menu1.mp4") in new stack
MP4ERROR: FindTrackId: Track index doesn't exist - track 1
type hint
MP4ERROR: MP4Array::[]: index 2 of 2: Numerical result out
of range
mp4play /var/video3G/menu1.mp4
found hint track 2
track 1 vide
MP4ReadRtpHint failed
  == Auto fallthrough, channel 'SIP/1000-081d9eb0' status is
'UNKNOWN'


Tom
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-video

Re: problem with mp4play in sip and h324m
country flaguser name
Spain
2007-03-21 18:21:26
Does the mp4play work correctly with the xmeetin?
Could you enable the sip debug and send me both sdps and
enable
also rtp debug to see if it sends something at all??

Greetings
Sergio Garcia

----- Original Message ----- 
From: "Tom De Wispelaere" <tombesite.be>
To: <asterisk-videolists.digium.com>
Sent: Wednesday, March 21, 2007 6:53 PM
Subject: [Asterisk-video] problem with mp4play in sip and
h324m


> Hello,
>
> I recently got h324m up and running in asterisk 1.4.
> Great work btw !
> When i make a call from my nokia n70 to an E1,
h324m_loop works fine
> and i can also see the video from my camera feeded back
to me. Very
> cool. So far so good.
>
> In a next step I tried getting mp4play (and mp4save) to
stream an mp4
> to my mobile but i don't see anything appearing on my
mobile and the
> call is finished abruptly.
> I tried with different hinted mp4 files created with
mp4creator that
> seem to play ok on vlc, so i don't think they are the
culprit. I did
> try playing video with mp4play through a sip videocall
(xmeeting on
> osx), which also does not seem to work.
> I'm a bit lost as to why i can't get mp4play to work
correctly ; any
> pointers on what i could try next would be much
appreciated !
>
> The h324 context i use for testing is as follows
>
> [videocalltest3]
> exten => s,1,h324m_gw(svideo)
>
> [video]
> exten => s,1,Wait(4)
> exten => s,2,Answer
> exten => s,3,Wait(4)
> exten => s,4,mp4play(/tmp/video3G/menu1.mp4)
> exten => t,1,Goto(s,4)
>
> when i call from my nokia i see the following in the
logs
>
>  == Registered application 'mp4save'
>  == Registered application 'mp4play'
> ...
>  -- Accepting call from '' to 'xxxx' on channel 0/9,
span 1
>     -- Executing [xxxxlocal:1]
Macro("Zap/9-1",
> "gotostuff|videocalltest3") in new stack
>     -- Executing [smacro-gotostuff:1]
Set("Zap/9-1",
> "dialedphonenb=xxxxx") in new stack
>     -- Executing [smacro-gotostuff:2]
Set("Zap/9-1",
> "CDR(accountcode)=") in new stack
>     -- Executing [smacro-gotostuff:3]
Set("Zap/9-1", "country=") in new
stack
>     -- Executing [smacro-gotostuff:4]
Set("Zap/9-1", "language=") in new
stack
>     -- Executing [smacro-gotostuff:5]
Goto("Zap/9-1",
> "videocalltest3|s|1") in new stack
>     -- Goto (videocalltest3,s,1)
>   == Channel 'Zap/9-1' jumping out of macro
'gotostuff'
>     -- Executing [svideocalltest3:1]
h324m_gw("Zap/9-1", "svideo")
> in new stack
> [2007-03-21 18:05:58] WARNING[7123]: channel.c:627
ast_best_codec:
> Don't know any of 0x2000 formats
>     -- Executing [svideo:1]
Wait("Local/svideo-19c7,2", "4") in new
stack
>     -- Executing [svideo:2]
Answer("Local/svideo-19c7,2", "") in new
stack
>     -- Executing [svideo:3]
Wait("Local/svideo-19c7,2", "4") in new
stack
> H245 TerminalCapabilitySet TransferRequest
> -WriteControlPDU [request]
> Encode PDU [95]
> Sending CMD [0,87]
> H245 Request MasterSlaveDetermination
> -WriteControlPDU [request]
> Encode PDU [20]
> Sending CMD [1,7]
> Sending CMD [0] - 1 left
> Received SRP_NSRP_RESPONSE [0]
> Received SRP_SRP_COMMAND [0]
> Sending NSRP [0]
> -OnControlPDU [request]
> -OnH245Request
> H245 Received TerminalCapabilitySet
> -Event!!
> -WriteControlPDU [response]
> Encode PDU [20]
> Sending CMD [2,3]
> -OnControlPDU [indication]
> -OnH245Indication
> Unknown Indication
> -OnControlPDU [request]
> -OnH245Request
> H245 MasterSlaveDetermination
> -WriteControlPDU [response]
> Encode PDU [20]
> Sending CMD [3,2]
> -Event!!
> H245 Request MasterSlaveDetermination
> -OnControlPDU [response]
> -OnH245Response
> H245 Received TerminalCapabilitySetAck
> -Event!!
> ...
> Received SRP_SRP_COMMAND [1]
> Sending NSRP [1]
> -OnControlPDU [response]
> -OnH245Response
> H245 MasterSlave Ack
> -Event!!
> H245 H245LogicalChannels Establish Request [1]
> -WriteControlPDU [request]
> Encode PDU [34]
> Sending CMD [4,26]
> H245 H245LogicalChannels Establish Request [2]
> -WriteControlPDU [request]
> Encode PDU [20]
> Sending CMD [5,17]
> H245 MultiplexEntrySend
> -WriteControlPDU [request]
> Encode PDU [20]
> Sending CMD [6,15]
> Received out of order SRP_NSRP_RESPONSE [1]
> Received out of order SRP_NSRP_RESPONSE [1]
> Received out of order SRP_NSRP_RESPONSE [1]
> Received out of order SRP_NSRP_RESPONSE [1]
> Received out of order SRP_NSRP_RESPONSE [1]
>     -- Executing [svideo:4]
mp4play("Local/svideo-19c7,2",
> "/var/video3G/menu1.mp4") in new stack
> MP4ERROR: FindTrackId: Track index doesn't exist -
track 1 type hint
> mp4play /var/video3G/menu1.mp4
> found hint track 2
> track 1 vide
> Received SRP_SRP_COMMAND [2]
> Sending NSRP [2]
> -OnControlPDU [request]
> -OnH245Request
> H245 H245OpenLogicalChannel received [1]
> -Event!!
> -OnLogicalChannel
> -OnEstablishIndication [1]
> -Creating receiving layer [1,1,40d47a50,0,0,4,0]
> -WriteControlPDU [response]
> Encode PDU [20]
> Sending CMD [7,4]
> -OnControlPDU [request]
> -OnH245Request
> H245 H245OpenLogicalChannel received [2]
> -Event!!
> -OnLogicalChannel
> -OnEstablishIndication [2]
> -Creating receiving layer [2,2,40d58e20,1,1,3,1]
> -WriteControlPDU [response]
> Encode PDU [20]
> Sending CMD [8,4]
> -OnControlPDU [request]
> -OnH245Request
> H245 MultiplexEntrySend request
> Check
> request multiplexEntrySend {
>         sequenceNumber = 1
>  multiplexEntryDescriptors = 2 entries {
>           [0]={
>             multiplexTableEntryNumber = 1
>             elementList = 1 entries {
>               [0]={
>                 type = logicalChannelNumber 1
>                 repeatCount = untilClosingFlag
<<null>>
>               }
>        MP4ERROR: MP4Array::[]: index 2 of 2: Numerical
result out of range
>      }
>           }
>           [1]={
>             multiplexTableEntryNumber = 2
>             elementList = 1 entries {
>               [0]={
>                 type = logicalChannelNumber 2
>                 repeatCount = untilClosingFlag
<<null>>
>               }
>             }
>           }
>         }
>       }
> -Event!!
> -OnMultiplexTable
> -WriteControlPDU [response]
> Encode PDU [20]
> Sending CMD [9,5]
> MP4ReadRtpHint failed
>   == Auto fallthrough, channel 'Local/svideo-19c7,2' status is 'UNKNOWN'
>
> The sip videocall via xmeeting goes something like this
:
>
> -- Executing [1200inbound-from-sip:1]
Answer("SIP/1000-081d9eb0", "")
> in new stack
>     -- Executing [1200inbound-from-sip:2]
> mp4play("SIP/1000-081d9eb0",
"/var/video3G/menu1.mp4") in new stack
> MP4ERROR: FindTrackId: Track index doesn't exist -
track 1 type hint
> MP4ERROR: MP4Array::[]: index 2 of 2: Numerical result
out of range
> mp4play /var/video3G/menu1.mp4
> found hint track 2
> track 1 vide
> MP4ReadRtpHint failed
>   == Auto fallthrough, channel 'SIP/1000-081d9eb0'
status is 'UNKNOWN'
>
>
> Tom
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-video
>

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-video

Re: problem with mp4play in sip and h324m
user name
2007-03-22 18:11:29
Hey Sergio,

Thanks for all the help,

I tried with xten lite and everything worked once i disabled
every
videocodec except h.263+(1998) in the client. I can now see
the files
i play with mp4play.
I was unaware of the fact that there are 3 different
versions of h236....
Also, I can now see the mp4 files on my nokia (i encoded
some myself
with ffmpeg).


Do we need the h236 to h236 transcoder to get sip video to
the h324m
call and vice versa or is there another way ?

Best regards,

Tom


On 3/22/07, Sergio Garcia Murillo <sergio.garciafontventa.com> wrote:
> Does the mp4play work correctly with the xmeetin?
> Could you enable the sip debug and send me both sdps
and enable
> also rtp debug to see if it sends something at all??
>
> Greetings
> Sergio Garcia
>
> ----- Original Message -----
> From: "Tom De Wispelaere" <tombesite.be>
> To: <asterisk-videolists.digium.com>
> Sent: Wednesday, March 21, 2007 6:53 PM
> Subject: [Asterisk-video] problem with mp4play in sip
and h324m
>
>
> > Hello,
> >
> > I recently got h324m up and running in asterisk
1.4.
> > Great work btw !
> > When i make a call from my nokia n70 to an E1,
h324m_loop works fine
> > and i can also see the video from my camera feeded
back to me. Very
> > cool. So far so good.
> >
> > In a next step I tried getting mp4play (and
mp4save) to stream an mp4
> > to my mobile but i don't see anything appearing on
my mobile and the
> > call is finished abruptly.
> > I tried with different hinted mp4 files created
with mp4creator that
> > seem to play ok on vlc, so i don't think they are
the culprit. I did
> > try playing video with mp4play through a sip
videocall (xmeeting on
> > osx), which also does not seem to work.
> > I'm a bit lost as to why i can't get mp4play to
work correctly ; any
> > pointers on what i could try next would be much
appreciated !
> >
> > The h324 context i use for testing is as follows
> >
> > [videocalltest3]
> > exten => s,1,h324m_gw(svideo)
> >
> > [video]
> > exten => s,1,Wait(4)
> > exten => s,2,Answer
> > exten => s,3,Wait(4)
> > exten => s,4,mp4play(/tmp/video3G/menu1.mp4)
> > exten => t,1,Goto(s,4)
> >
> > when i call from my nokia i see the following in
the logs
> >
> >  == Registered application 'mp4save'
> >  == Registered application 'mp4play'
> > ...
> >  -- Accepting call from '' to 'xxxx' on channel
0/9, span 1
> >     -- Executing [xxxxlocal:1]
Macro("Zap/9-1",
> > "gotostuff|videocalltest3") in new
stack
> >     -- Executing [smacro-gotostuff:1]
Set("Zap/9-1",
> > "dialedphonenb=xxxxx") in new stack
> >     -- Executing [smacro-gotostuff:2]
Set("Zap/9-1",
> > "CDR(accountcode)=") in new stack
> >     -- Executing [smacro-gotostuff:3]
Set("Zap/9-1", "country=") in new
> stack
> >     -- Executing [smacro-gotostuff:4]
Set("Zap/9-1", "language=") in new
> stack
> >     -- Executing [smacro-gotostuff:5]
Goto("Zap/9-1",
> > "videocalltest3|s|1") in new stack
> >     -- Goto (videocalltest3,s,1)
> >   == Channel 'Zap/9-1' jumping out of macro
'gotostuff'
> >     -- Executing [svideocalltest3:1]
h324m_gw("Zap/9-1", "svideo")
> > in new stack
> > [2007-03-21 18:05:58] WARNING[7123]: channel.c:627
ast_best_codec:
> > Don't know any of 0x2000 formats
> >     -- Executing [svideo:1]
Wait("Local/svideo-19c7,2", "4") in new
> stack
> >     -- Executing [svideo:2]
Answer("Local/svideo-19c7,2", "") in new
> stack
> >     -- Executing [svideo:3]
Wait("Local/svideo-19c7,2", "4") in new
> stack
> > H245 TerminalCapabilitySet TransferRequest
> > -WriteControlPDU [request]
> > Encode PDU [95]
> > Sending CMD [0,87]
> > H245 Request MasterSlaveDetermination
> > -WriteControlPDU [request]
> > Encode PDU [20]
> > Sending CMD [1,7]
> > Sending CMD [0] - 1 left
> > Received SRP_NSRP_RESPONSE [0]
> > Received SRP_SRP_COMMAND [0]
> > Sending NSRP [0]
> > -OnControlPDU [request]
> > -OnH245Request
> > H245 Received TerminalCapabilitySet
> > -Event!!
> > -WriteControlPDU [response]
> > Encode PDU [20]
> > Sending CMD [2,3]
> > -OnControlPDU [indication]
> > -OnH245Indication
> > Unknown Indication
> > -OnControlPDU [request]
> > -OnH245Request
> > H245 MasterSlaveDetermination
> > -WriteControlPDU [response]
> > Encode PDU [20]
> > Sending CMD [3,2]
> > -Event!!
> > H245 Request MasterSlaveDetermination
> > -OnControlPDU [response]
> > -OnH245Response
> > H245 Received TerminalCapabilitySetAck
> > -Event!!
> > ...
> > Received SRP_SRP_COMMAND [1]
> > Sending NSRP [1]
> > -OnControlPDU [response]
> > -OnH245Response
> > H245 MasterSlave Ack
> > -Event!!
> > H245 H245LogicalChannels Establish Request [1]
> > -WriteControlPDU [request]
> > Encode PDU [34]
> > Sending CMD [4,26]
> > H245 H245LogicalChannels Establish Request [2]
> > -WriteControlPDU [request]
> > Encode PDU [20]
> > Sending CMD [5,17]
> > H245 MultiplexEntrySend
> > -WriteControlPDU [request]
> > Encode PDU [20]
> > Sending CMD [6,15]
> > Received out of order SRP_NSRP_RESPONSE [1]
> > Received out of order SRP_NSRP_RESPONSE [1]
> > Received out of order SRP_NSRP_RESPONSE [1]
> > Received out of order SRP_NSRP_RESPONSE [1]
> > Received out of order SRP_NSRP_RESPONSE [1]
> >     -- Executing [svideo:4]
mp4play("Local/svideo-19c7,2",
> > "/var/video3G/menu1.mp4") in new stack
> > MP4ERROR: FindTrackId: Track index doesn't exist -
track 1 type hint
> > mp4play /var/video3G/menu1.mp4
> > found hint track 2
> > track 1 vide
> > Received SRP_SRP_COMMAND [2]
> > Sending NSRP [2]
> > -OnControlPDU [request]
> > -OnH245Request
> > H245 H245OpenLogicalChannel received [1]
> > -Event!!
> > -OnLogicalChannel
> > -OnEstablishIndication [1]
> > -Creating receiving layer [1,1,40d47a50,0,0,4,0]
> > -WriteControlPDU [response]
> > Encode PDU [20]
> > Sending CMD [7,4]
> > -OnControlPDU [request]
> > -OnH245Request
> > H245 H245OpenLogicalChannel received [2]
> > -Event!!
> > -OnLogicalChannel
> > -OnEstablishIndication [2]
> > -Creating receiving layer [2,2,40d58e20,1,1,3,1]
> > -WriteControlPDU [response]
> > Encode PDU [20]
> > Sending CMD [8,4]
> > -OnControlPDU [request]
> > -OnH245Request
> > H245 MultiplexEntrySend request
> > Check
> > request multiplexEntrySend {
> >         sequenceNumber = 1
> >  multiplexEntryDescriptors = 2 entries {
> >           [0]={
> >             multiplexTableEntryNumber = 1
> >             elementList = 1 entries {
> >               [0]={
> >                 type = logicalChannelNumber 1
> >                 repeatCount = untilClosingFlag
<<null>>
> >               }
> >        MP4ERROR: MP4Array::[]: index 2 of 2:
Numerical result out of range
> >      }
> >           }
> >           [1]={
> >             multiplexTableEntryNumber = 2
> >             elementList = 1 entries {
> >               [0]={
> >                 type = logicalChannelNumber 2
> >                 repeatCount = untilClosingFlag
<<null>>
> >               }
> >             }
> >           }
> >         }
> >       }
> > -Event!!
> > -OnMultiplexTable
> > -WriteControlPDU [response]
> > Encode PDU [20]
> > Sending CMD [9,5]
> > MP4ReadRtpHint failed
> >   == Auto fallthrough, channel 'Local/svideo-19c7,2' status is 'UNKNOWN'
> >
> > The sip videocall via xmeeting goes something like
this :
> >
> > -- Executing [1200inbound-from-sip:1]
Answer("SIP/1000-081d9eb0", "")
> > in new stack
> >     -- Executing [1200inbound-from-sip:2]
> > mp4play("SIP/1000-081d9eb0",
"/var/video3G/menu1.mp4") in new stack
> > MP4ERROR: FindTrackId: Track index doesn't exist -
track 1 type hint
> > MP4ERROR: MP4Array::[]: index 2 of 2: Numerical
result out of range
> > mp4play /var/video3G/menu1.mp4
> > found hint track 2
> > track 1 vide
> > MP4ReadRtpHint failed
> >   == Auto fallthrough, channel 'SIP/1000-081d9eb0'
status is 'UNKNOWN'
> >
> >
> > Tom
> > _______________________________________________
> > --Bandwidth and Colocation provided by
Easynews.com --
> >
> > asterisk-video mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-video
> >
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-video
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-video

[1-3]

about | contact  Other archives ( Real Estate discussion Medical topics )