Trouble making outbound h324m video call

Hi Rene!

Do incoming h324m call work?

Could you provide q931 dumps of the incoming and the outgoing call? (use
"pri debug span x"  x is your span)

regards
klaus

Rene van Weert schrieb:

> Hey everyone,
>
> I'm trying to make an outbound call using h324m_call but I keep getting
> stuck with the following error:
>;
>     -- Executing [665from-sip:1] h324m_call("SIP/2000-08214978",

> "666test <mailto: 666test">666test>&quot;) in new stack

>     -- Executing [666test:1] Set(" Local/666test-89ed,2

> <mailto: Local/666test-89ed">Local/666test-89ed,2>";, "CHANNEL(transfercapability)=VIDEO&quot;) in

> new stack
>     -- Executing [666test:2] NoOp(";Local/666test-89ed,2

> <mailto: Local/666test-89ed">Local/666test-89ed,2>";, "transfer=VIDEO&quot;) in new stack

>     -- Executing [666test:3] Set("Local/666test-89ed,2

> <mailto: Local/666test-89ed">Local/666test-89ed,2>";, "CHANNEL(userinformationlayer1)=38&quot;) in

> new stack
>     -- Executing [666test:4] NoOp("; Local/666test-89ed,2

> <mailto: Local/666test-89ed">Local/666test-89ed,2>";, "ul1=38") in new stack

>     -- Executing [666test:5] Dial(";Local/666test-89ed,2

> <mailto: Local/666test-89ed">Local/666test-89ed,2>";, "Zap/g1/0x") in new stack

>     -- digital call, setting user information layer 1 to 38 (0x26)
>;     -- Requested transfer capability: 0x18 - VIDEO
>     -- Called g1/06xxxx
> *    -- Channel 0/2, span 1 got hangup, cause 100
> *    -- Hungup 'Zap/2-1'
>; Cause 100 means the following on a page of isdn cause codes i found:
>;
> *Cause No. 100 - Invalid information element contents.*
> This cause indicates that the equipment sending this cause has received
> and information element which it has implemented; however, one or more
> of the fields in the information element are coded in such a way which
> has not been implemented by the equipment sending this cause.
&gt;
> What it means:
>; Like cause 1 and cause 88, this usually indicates that the ISDN number
>; being dialed is in a format that is not understood by the equipment
> processing the call. SPIDs will sometimes fail to initialize with a
> Cause 100, or a call will fail with this cause.
>;
> Can anyone help me in resolving this problem?
&gt; I am running Asterisk 1.4.15 with Digium TE110P 1 span on a KPN (also
> tried MCI) E1 line.
&gt;
> If any more info needed please let me know.
>
> Thanks and cheers!
&gt; René van Weert
>
>

> ------------------------------------------------------------------------
&gt;
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
&gt;
> asterisk-video mailing list
>; To UNSUBSCRIBE or update options visit:
>;    http://lists.digium.com/mailman/listinfo/asterisk-video

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
&nbsp; http://lists.digium.com/mailman/listinfo/asterisk-video

Hi Rene!

Do you have a pri debug dump of an incoming H324M call?

klaus

Rene van Weert schrieb:

> Dear Klaus,
>;
> Here is the pri debug dump:
>
>
> [Dec 24 16:28:05] VERBOSE[4445] logger.c: NEW_HANGUP DEBUG: Destroying
> the call, ourstate Null, peerstate Null
>;
> [Dec 24 16:28:06] VERBOSE[7206] logger.c: -- Executing [665from-sip:1]
> h324m_call("SIP/2000-082158d8", "666test") in new stack
>
> [Dec 24 16:28:06] DEBUG[7206] app_h324m.c: h324m_call
>
>; [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666test:1]
&gt; Set("Local/666test-bb08,2", "CHANNEL(transfercapability)=VIDEO&quot;) in new
> stack
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666test:2]
> Set("Local/666test-bb08,2", "CALLERID(NUM)=367111999&quot;) in new stack
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666test:3]
&gt; NoOp(";Local/666test-bb08,2", "transfer=VIDEO&quot;) in new stack
&gt;
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666test:4]
&gt; Set("Local/666test-bb08,2", "CHANNEL(userinformationlayer1)=38&quot;) in new
> stack
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666test:5]
> NoOp(";Local/666test-bb08,2", "ul1=38") in new stack
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Executing [666test:6]
&gt; Dial(";Local/666test-bb08,2", "Zap/g1/06150XXXX") in new stack
&gt;
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Making new call for cr 32771
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- digital call, setting user
> information layer 1 to 38 (0x26)
>;
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Requested transfer
&gt; capability: 0x18 - VIDEO
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Protocol Discriminator:
> Q.931 (8) len=42
>;
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Call Ref: len= 2 (reference
> 3/0x3) (Originator)
>
>; [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Message type: SETUP (5)
>
&gt; [Dec 24 16:28:06] VERBOSE[7207] logger.c: > [04 03 88 90 a6]
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Bearer Capability (len= 5) [
> Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital
&gt; information (8)
>
&gt; [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Ext: 1 Trans mode/rate:
> 64kbps, circuit-mode (16)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Ext: 1 User information
> layer 1: H.223 and H.245 (38)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > [18 03 a9 83 81]
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Channel ID (len= 5) [ Ext: 1
> IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0
>
>; [Dec 24 16:28:06] VERBOSE[7207] logger.c: > ChanSel: Reserved
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Ext: 1 Coding: 0 Number
>; Specified Channel Type: 3
>
>; [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Ext: 1 Channel: 1 ]
>
>; [Dec 24 16:28:06] VERBOSE[7207] logger.c: > [6c 0b 41 81 33 36 37 31 31
> 31 39 39 39]
>
&gt; [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Calling Number (len=13) [
> Ext: 0 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan
> (E.164/E.163) (1)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Presentation: Presentation
> permitted, user number passed network screening (1) '367111999' ]
>
>; [Dec 24 16:28:06] VERBOSE[7207] logger.c: > [70 0b c1 30 36 31 35 30 36
> 34 30 38 30]
>
&gt; [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Called Number (len=13) [
> Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan
> (E.164/E.163) (1) '061506XXXX' ]
>
&gt; [Dec 24 16:28:06] VERBOSE[7207] logger.c: > [a1]
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: > Sending Complete (len= 1)
>
&gt; [Dec 24 16:28:06] VERBOSE[7207] logger.c: q931.c:2881 q931_setup: call
>; 32771 on channel 1 enters state 1 (Call Initiated)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Called g1/061506XXXX
>
&gt; [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Protocol Discriminator:
> Q.931 (8) len=10
>;
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Call Ref: len= 2 (reference
> 3/0x3) (Terminator)
>
>; [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Message type: RELEASE
> COMPLETE (90)
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: < [08 03 80 e4 04]
>
&gt; [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Cause (len= 5) [ Ext: 1
> Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0)
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Ext: 1 Cause: Invalid
&gt; information element contents (100), class = Protocol Error (e.g. unknown
&gt; message) (6) ]
>
>; [Dec 24 16:28:06] VERBOSE[4445] logger.c: < Cause data 1: 04 (4)
>
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: -- Processing IE 8 (cs0, Cause)
>;
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: q931.c:3503 q931_receive: call
> 32771 on channel 1 enters state 0 (Null)
&gt;
> [Dec 24 16:28:06] VERBOSE[4445] logger.c: -- Channel 0/1, span 1 got
> hangup, cause 100
>
&gt; [Dec 24 16:28:06] DEBUG[7207] chan_zap.c: Set option AUDIO MODE, value:
>; ON(1) on Zap/1-1
>
> [Dec 24 16:28:06] DEBUG[7207] chan_zap.c: Already hungup... Calling
&gt; hangup once, and clearing call
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: NEW_HANGUP DEBUG: Calling
&gt; q931_hangup, ourstate Null, peerstate Null
>;
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: NEW_HANGUP DEBUG: Destroying
> the call, ourstate Null, peerstate Null
>
> [Dec 24 16:28:06] DEBUG[7207] chan_zap.c: Set option AUDIO MODE, value:
&gt; OFF(0) on Zap/1-1
&gt;
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: -- Hungup 'Zap/1-1'
>;
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: == Everyone is busy/congested
> at this time (1:0/0/1)
>
> [Dec 24 16:28:06] VERBOSE[7207] logger.c: == Auto fallthrough, channel
&gt; 'Local/666test-bb08,2' status is 'CHANUNAVAIL'
>
> [Dec 24 16:28:06] VERBOSE[7206] logger.c: == Spawn extension (from-sip,
> 665, 1) exited non-zero on 'SIP/2000-082158d8'
>
> Hope this helps...
&gt; Thanks! Ohw and of course a very happy christmas to you and everyone
&gt; else reading this! Enjoy!
>;
> René
>;
> On Dec 20, 2007 10:07 AM, Klaus Darilion < klaus.mailinglistspernau.at">klaus.mailinglistspernau.at

> <mailto: klaus.mailinglistspernau.at">klaus.mailinglistspernau.at>> wrote:
>;
>     Hi Rene!
>
>     Do incoming h324m call work?
>
>     Could you provide q931 dumps of the incoming and the outgoing call?
&gt;     (use
>     "pri debug span x"  x is your span)
>
>     regards
&gt;     klaus
>
>     Rene van Weert schrieb:
&gt;      > Hey everyone,
>      >
>      > I'm trying to make an outbound call using h324m_call but I keep
>;     getting
&gt;      > stuck with the following error:
>;      >
>      >     -- Executing [665from-sip:1] h324m_call("SIP/2000-08214978",

>      > "666test <mailto: 666test">666test <mailto: 666test">666test>&gt;") in new stack

>      >     -- Executing [666test:1] Set(" Local/666test-89ed,2

>      > <mailto: Local/666test-89ed">Local/666test-89ed <mailto: Local/666test-89ed">Local/666test-89ed>,2>&quot;,

>     "CHANNEL(transfercapability)=VIDEO&quot;) in
>      > new stack
>      >     -- Executing [666test:2] NoOp(";Local/666test-89ed,2

>      > <mailto: Local/666test-89ed">Local/666test-89ed <mailto: Local/666test-89ed">Local/666test-89ed>,2>&quot;,

>     "transfer=VIDEO&quot;) in new stack
>      >     -- Executing [666test:3] Set("Local/666test-89ed,2

>      > <mailto: Local/666test-89ed">Local/666test-89ed <mailto: Local/666test-89ed">Local/666test-89ed>,2>&quot;,

>     "CHANNEL(userinformationlayer1)=38&quot;) in
>      > new stack
>      >     -- Executing [666test:4] NoOp("; Local/666test-89ed,2

>      > <mailto: Local/666test-89ed">Local/666test-89ed <mailto: Local/666test-89ed">Local/666test-89ed>,2>&quot;,

>     "ul1=38") in new stack
>      >     -- Executing [666test:5] Dial(";Local/666test-89ed,2

>      > <mailto: Local/666test-89ed">Local/666test-89ed <mailto: Local/666test-89ed">Local/666test-89ed>,2>&quot;,

>     "Zap/g1/0x") in new stack
>      >     -- digital call, setting user information layer 1 to 38 (0x26)
>;      >     -- Requested transfer capability: 0x18 - VIDEO
&gt;      >     -- Called g1/06xxxx
>      > *    -- Channel 0/2, span 1 got hangup, cause 100
>      > *    -- Hungup 'Zap/2-1'
>;      > Cause 100 means the following on a page of isdn cause codes i found:
&gt;      >
>      > *Cause No. 100 - Invalid information element contents.*
>      > This cause indicates that the equipment sending this cause has
>     received
&gt;      > and information element which it has implemented; however, one or
>     more
>      > of the fields in the information element are coded in such a way
>     which
>      > has not been implemented by the equipment sending this cause.
>;      >
>      > What it means:
&gt;      > Like cause 1 and cause 88, this usually indicates that the ISDN
>     number
>;      > being dialed is in a format that is not understood by the equipment
>      > processing the call. SPIDs will sometimes fail to initialize with a
>      > Cause 100, or a call will fail with this cause.
>;      >
>      > Can anyone help me in resolving this problem?
&gt;      > I am running Asterisk 1.4.15 with Digium TE110P 1 span on a KPN (also
&gt;      > tried MCI) E1 line.
>      >
>      > If any more info needed please let me know.
>      >
>      > Thanks and cheers!
&gt;      > René van Weert
>      >
>      >
>      >
>     ------------------------------------------------------------------------
>;
>      >
>      > _______________________________________________
>      > --Bandwidth and Colocation Provided by

>;     http://www.api-digital.com-- <http://www.api-digital.com--/&gt;

>      >
>      > asterisk-video mailing list
>      > To UNSUBSCRIBE or update options visit:
>;      >    http://lists.digium.com/mailman/listinfo/asterisk-video
>
&gt;     _______________________________________________
>     --Bandwidth and Colocation Provided by http://www.api-digital.com--
&gt;     <http://www.api-digital.com--/&gt;
>
&gt;     asterisk-video mailing list
>     To UNSUBSCRIBE or update options visit:
>;       http://lists.digium.com/mailman/listinfo/asterisk-video
>
&gt;
>
&gt; ------------------------------------------------------------------------
>;
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
>;    http://lists.digium.com/mailman/listinfo/asterisk-video

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
&nbsp; http://lists.digium.com/mailman/listinfo/asterisk-video