Using a Verisign Certificate for SSL

Joe,

You need to modify your virtual host so it listens on port
443. By
default, it listens on port 80 and a couple of other ports
that were set
up when the instance was generated.

Matt 

-----Original Message-----
From: web400-bouncesmidrange.com [mailto:web400-bouncesmidrange.com]
On Behalf Of Joe Pluta
Sent: Tuesday, March 28, 2006 4:37 PM
To: 'Web Enabling the AS400 / iSeries'
Subject: Re: [WEB400] Using a Verisign Certificate for SSL

Hot snarkies!  By adding the virtual host as shown below
(and no
NameVirtualHost entry), I do indeed get the appropriate SSL
access!
Both
the SSL and the non-SSL requests (both via IP and via DNS
name) get
routed
properly.  My only problem now is that the WebSphere
requests are not
getting intercepted by the WebSphere plug-in.  My guess is
that there's
probably something in my WebSphere configuration that needs
to be set
correctly to route the HTTPS requests the same way it routes
the HTTP
requests.

Thanks everyone for helping this far.  We're getting close!

Joe

> From: Alfredo Delgado
> 
> If you add the following lines, I would expect https://10.20.30.40/ to
> take you to the same place http://10.20.30.40/ does.
> 
> <VirtualHost 10.20.30.40:443>
>    SSLEngine On
>    SSLAppName QIBM_HTTP_SERVER_MYINSTANCE
> </VirtualHost>


-- 
This is the Web Enabling the AS400 / iSeries (WEB400)
mailing list
To post a message email: WEB400midrange.com
To subscribe, unsubscribe, or change list options,
visit: htt
p://lists.midrange.com/mailman/listinfo/web400
or email: WEB400-requestmidrange.com
Before posting, please take a moment to review the archives
at http://archive.mi
drange.com/web400.


-- 
This is the Web Enabling the AS400 / iSeries (WEB400)
mailing list
To post a message email: WEB400midrange.com
To subscribe, unsubscribe, or change list options,
visit: htt
p://lists.midrange.com/mailman/listinfo/web400
or email: WEB400-requestmidrange.com
Before posting, please take a moment to review the archives
at http://archive.mi
drange.com/web400.

Thanks, Matt!  That was exactly the issue that needed to be
fixed.  A simple
one line addition in the admin page and everything is up and
running.  Now,
however, I have to start looking at other bits and pieces
like anyplace
where "http:" is hardcoded and some other issues
with IP addresses.  But the
server is up and running with SSL!

Thanks for everyone's help!

Joe

> From: Matt.Haasthomson.com
> 
> Joe,
> 
> You need to modify your virtual host so it listens on
port 443. By
> default, it listens on port 80 and a couple of other
ports that were set
> up when the instance was generated.


-- 
This is the Web Enabling the AS400 / iSeries (WEB400)
mailing list
To post a message email: WEB400midrange.com
To subscribe, unsubscribe, or change list options,
visit: htt
p://lists.midrange.com/mailman/listinfo/web400
or email: WEB400-requestmidrange.com
Before posting, please take a moment to review the archives
at http://archive.mi
drange.com/web400.