Re: Recursion Limits problem on load of connector .swf.

Thread: Re: Recursion Limits problem on load of connector .swf.

Search this list only Search all lists
Re: Recursion Limits problem on load of connector .swf.
Switzerland	2007-03-16 08:52:32

Well, my remark was maybe a bit outdated, but I remember months ago that I had a main movie loading multiple swf. In one of those ;I forgot to remove the xray connector. This made irresponsive the loaded swf in question... It took me some time to find out what was killing my swf functionning and found iout finally that it was xray connector in the library.. By the way, it's possible that you corrected this issue... and that it won't behave the same way now. It was a remark from a veteran xray/admin tools user ;) I remember also having difficulties to use Xray when a FlashPaper document is loaded inside a main swf... but I think that FlashPaper is now dead since the merger of MM and Adobe... so it isn't interesting anymore ;) Best regards. Cedric Madelaine (aka maddec) http://analogdesign.ch De : xray-bouncesosflash.org [mailtoray-bouncesosflash.org] De la part de John Grden Envoyé : vendredi, 16. mars 2007 14:18 À : xrayosflash.org Objet : Re: [xray] Recursion Limits problem on load of connector .swf. I don't know to be honest.  The thing about Flash is, it's a first come first served scenario with the version of code (IE: if 1.6.1 loads before 1.6.2, then 1.6.1 code is used) however, if both try to load BOTH will call Xray.initConnetions() and the code within the constructor etc. So, there could be a potential issue there, yes. On 3/14/07, analogdesign <analogdesign.ch"> newslanalogdesign.ch> wrote: Hi there, Firstly if I were you I would check that things that you load inside your main movie haven't their own xray connector  (same version or worst not the same version), because this can make crash you main swf. You should use only one connector which resides inside the main.swf. Isn't it John? Best regards. Cedric Madelaine (aka maddec) http://analogdesign.ch -----Message d'origine----- De : osflash.org">xray-bouncesosflash.org [mailto:osflash.org">xray-bouncesosflash.org] De la part de Jos Yule Envoyé : mercredi, 14. mars 2007 18:02 À : osflash.org">xrayosflash.org Objet : [xray] Recursion Limits problem on load of connector .swf. Hello all. I've been trying to figure out where my problem is with my use of the Xray package. I've downloaded the latest versions of the client (the flex interface), and the connector only package (1.6.2). I've setup a test fla in which I load the connector, and am able to have the client see logging messages and do snapshots. However, in a production .fla that I'm working on, as soon as I load the connector, I get a recursion limit message in the output window (of the flash IDE). If I simply use the logging, things work fine. It is only the loading of the connector .swf which causes the recursion problem. The .fla that is causing the problems has some complex loading code (when published via the IDE, it replaces itself with a loader, which then loads itself again - its complex), but all the loading is done by the time the connector is itself loaded. Any pointers to code in the connector that I could look at to figure this out would be appreciated, or any hints at all! Thanks, Jos _______________________________________________ xray mailing list osflash.org">xrayosflash.org http://osflash.org/mailman/listinfo/xray_osflash.org _______________________________________________ xray mailing list osflash.org">xrayosflash.org http://osflash.org/mailman/listinfo/xray_osflash.org -- [  JPG  ]

[1]

about | contact Other archives ( Real Estate discussion Medical topics )