I am trying to synchronize a set of four computers. I am
using a PCI
timecard that only has a 32-bit driver and was the only card
that could
satisfy my timing requirements. I am using a PowerMac G5
currently as
the display for the system. The other machines in the
network are G5
Xserve's. I have got the Xserve's synchronized to within my
requirements but the PowerMac requires me to install YDL
4.0.91 or
higher which is a 64-bit OS. Obviously, the driver isn't
going to work
on this OS without a good deal of modification and I would
rather not
have to rewrite the driver. The Xserve's have YDL 4.0.0
(32-bit) on
them so if I was able to get a dual-output graphics card to
work with
YDL 4.0.0 on the Xserve's that would solve my problem as I
would just
use four Xserve's and forget about the PowerMac. So my
question is
whether there is any dual-output graphics card that can be
used in the
Xserve's and be supported by YDL 4.0.0? Or is there some
way to get a
32-bit YDL on my PowerMac G5?
Any help with this would be greatly appreciated. Thanks.
Jeremiah Richardson
_______________________________________________
yellowdog-general mailing list
yellowdog-general lists.terrasoftsolutions.com
http://lists.terrasoftsolutions.com/mailma
n/listinfo/yellowdog-general
HINT: to Google archives, try '<keywords>
site:terrasoftsolutions.com'
|