300 Users in two DHCP servers

   *** From dhcp-server -- To unsubscribe, see the end of
this message. ***

Thanks Simon, now I have another issue ;)

Here is my dhcpd.conf inthe primary ... the secondary you
cam imagine it 
cause is more or less the same with differents ipīs. Letīs
see if tis is the 
definetly.


failover peer "dhcp-failover"{
primary;
address 192.168.1.100;
port 520;
peer address 192.168.1.200;
peer port 520;
max-response-delay 30;
max-unpacked-updates 10;
loadbalance max seconds 3;
mclt 1800;
split 128:
}
subnet 192.168.1.0 netmask 255.255.255.0 {

options subnet-mask 255.255.255.0;
option broadcast-address 192.168.1.255;
option routers 192.168.1.1;
option domain-name-servers 192.168.1.1;
pool {
failover peer "dhcp-failover";
max-lease-time 1800;
range 192.168.1.201 192.168.1.254
}



When I start dhcpd I get the next error:

undeclared subnet for eth0 to start (0.0.0.0)

What am I doing bad ?
This is an example of dhcp with failover that I have found
and modified.

Thanks so much again ;)

Jonathan D.


>From: Simon Hobson <dhcpthehobsons.co.uk>
>Reply-To: dhcp-serverisc.org
>To: dhcp-serverisc.org
>Subject: Re: 300 Users in two DHCP servers
>Date: Mon, 6 Mar 2006 14:47:34 +0000
>
>    *** From dhcp-server -- To unsubscribe, see the end
of this message. 
>***
>
>dopazo jonathan wrote:
>
> >I try now to run the program (dhcpd start) and I
get errors like this :
> >
> >line 26: pools with failover peers many not permit
dynamic bootp
>
>You need to add "deny dynamic bootp" IIRC.
If you don't need to
>dynamically give addresses to bootp clients then you can
put this in
>the global scope and it will apply everywhere.
>
> >I was looking for that error on google and what I
saw is that bootp is a 
>old
> >version of dhcpd si I think it must not be
installed. Am I right ?
>
>No, dhcp is a different system but could be considered a
successor to
>bootp. When the dhcp protocol was designed, they decided
to make the
>packets similar to bootp packets so that they could use
the bootp
>relay agents which by then were becoming common in
networking
>equipment. By doing this, it is possible to support dhcp
without
>needing any new software in the network other than what
was already
>there for bootp.
>
>There is a good section on the historical stuff early on
in "The DHCP
>Handbook" by Ralph Droms and Ted Lemon - which is
really the
>definitive guide to DHCP.
>
>
>--------------------------------------------------------
---------------
>List Archives : http://www.isc.org/ops/
lists/
>Unsubscribe   : http://www.
isc.org/sw/dhcp/dhcp-lists.php
>-or-          : mailto:dhcp-server-requestisc.org?Subject=unsubscribe
>--------------------------------------------------------
---------------
>

____________________________________________________________
_____
Die neue MSN Suche Toolbar mit Windows-Desktopsuche. Suchen
Sie gleichzeitig 
im Web, Ihren E-Mails und auf Ihrem PC! Jetzt neu! http://desktop.msn.de/ 
Jetzt gratis downloaden!


------------------------------------------------------------
-----------
List Archives : http://www.isc.org/ops/
lists/
Unsubscribe   : http://www.
isc.org/sw/dhcp/dhcp-lists.php    
-or-          : mailto:dhcp-server-requestisc.org?Subject=unsubscribe  
------------------------------------------------------------
-----------

   *** From dhcp-server -- To unsubscribe, see the end of
this message. ***

dopazo jonathan wrote:

>When I start dhcpd I get the next error:
>
>undeclared subnet for eth0 to start (0.0.0.0)

What does 'ifconfig' give ?

Simon

------------------------------------------------------------
-----------
List Archives : http://www.isc.org/ops/
lists/
Unsubscribe   : http://www.
isc.org/sw/dhcp/dhcp-lists.php    
-or-          : mailto:dhcp-server-requestisc.org?Subject=unsubscribe  
------------------------------------------------------------
-----------