GPS 3.3 with Keysoft 7

For those of you who have upgraded to Keysoft 7 on the
mPower or 
BrailleNote Classic, your GPS version 3.3 should continue to
work. 
You might have to reinstall it but everything will work
normally.

Since GPS is under the "Navigation" menu under
Keysoft 7, it takes a 
while to get used to pressing N from the Main Menu instead
of G, 
which will now get you Games.

On the PK with Keysoft 7, you will need a free GPS 3.3.1
version as 
the directory structure has changed on the PK to make it the
same as 
the mPower. Email your serial number for your PK to 
SheilaSenderoGroup.com for the 3.3.1 file.

You will also notice slightly different behavior under
Keysoft 7 with 
regard to activating your Bluetooth GPS receiver. Under
Keysoft 6 on 
the mPower, you should be very familiar with 3 steps for
activating 
the receiver which are, Activate, Reset and Activate again.
Under 
Keysoft 7, it is no longer necessary to reset and
reactivate. All you 
have to do is to Activate Activesync once if you have
performed a reset.

On the PK under KS6, you had to deactivate and reactivate
after doing 
a reset. Under KS7, once you do a reset, the PK is already 
deactivated and you just have to activate it once.

You may find that you need to pause at the Main menu for 5
seconds or 
so before pressing N for Navigation, otherwise you may get a

Bluetooth not connected message.

A new Getting Started document has been adjusted with these
Keysoft 7 
connectivity details.

Mike



Michael G. May

CEO Sendero Group

Developers and distributors of BrailleNote GPS
Distributing BrailleNote, VoiceNote, Miniguide, The Tissot
Silen-T 
tactile watch, and the ID Mate bar code reader

MikeMaySenderoGroup.com
http://www.SenderoGroup.c
om

1-888-757-6810, Fax (530) 757-6830, Mobile (530) 304-0007
Sendero Group, LLC
1118 Maple Lane, Davis, CA 95616-1723, USA

Latitude, 38 33 9.239 North
Longitude, 121 45 40.145 West

Mike 

I've just installed ks7 on a PK with gps 3.1 already on
board.  It
installed without any problems except for a minor quirk when
setting the
POI folder.  I had to swtich from directory to folder view
when entering
the destination folder. If I didn't it reported that it
couldn't find
the storage card, which I assume is related to it being
called compact
flash under ks 7.  Can I assume that I was sent the right
upgrade and
don't need any extra files? 

I also was lead to believe that for 3.3 I need an extra
patch to get
blue tooth to work?  Sounds odd?  Why ship something you
know needs a
patch? It all seemed confused so I guess when it arrives on
Tuesday I'll
find out. 

- Liam 

-----Original Message-----
From: gps-talkusers-bouncefreelists.org
[mailto:gps-talkusers-bouncefreelists.org] On Behalf Of
Michael May
Sent: 29 January 2006 18:55
To: GPS-talkusers-freelists.org
Subject: [gps-talkusers] GPS 3.3 with Keysoft 7


For those of you who have upgraded to Keysoft 7 on the
mPower or 
BrailleNote Classic, your GPS version 3.3 should continue to
work. 
You might have to reinstall it but everything will work
normally.

Since GPS is under the "Navigation" menu under
Keysoft 7, it takes a 
while to get used to pressing N from the Main Menu instead
of G, 
which will now get you Games.

On the PK with Keysoft 7, you will need a free GPS 3.3.1
version as 
the directory structure has changed on the PK to make it the
same as 
the mPower. Email your serial number for your PK to 
SheilaSenderoGroup.com for the 3.3.1 file.

You will also notice slightly different behavior under
Keysoft 7 with 
regard to activating your Bluetooth GPS receiver. Under
Keysoft 6 on 
the mPower, you should be very familiar with 3 steps for
activating 
the receiver which are, Activate, Reset and Activate again.
Under 
Keysoft 7, it is no longer necessary to reset and
reactivate. All you 
have to do is to Activate Activesync once if you have
performed a reset.

On the PK under KS6, you had to deactivate and reactivate
after doing 
a reset. Under KS7, once you do a reset, the PK is already 
deactivated and you just have to activate it once.

You may find that you need to pause at the Main menu for 5
seconds or 
so before pressing N for Navigation, otherwise you may get a

Bluetooth not connected message.

A new Getting Started document has been adjusted with these
Keysoft 7 
connectivity details.

Mike



Michael G. May

CEO Sendero Group

Developers and distributors of BrailleNote GPS
Distributing BrailleNote, VoiceNote, Miniguide, The Tissot
Silen-T 
tactile watch, and the ID Mate bar code reader

MikeMaySenderoGroup.com
http://www.SenderoGroup.c
om

1-888-757-6810, Fax (530) 757-6830, Mobile (530) 304-0007
Sendero Group, LLC
1118 Maple Lane, Davis, CA 95616-1723, USA

Latitude, 38 33 9.239 North
Longitude, 121 45 40.145 West