|
List Info
Thread: GPS 3.3 with Keysoft 7
|
|
| GPS 3.3 with Keysoft 7 |

|
2006-01-29 23:16:40 |
Liam,
There is no patch required. For the PK, there is just this
3.3.1,
which deals with some slightly different directory
procedures.
If you have a PK, send your SN to Sheila Senderogroup.com for the
3.3.1 GPS exe.
Mike
At 02:41 PM 1/29/2006, you wrote:
>Mike
>
>I've just installed ks7 on a PK with gps 3.1 already on
board. It
>installed without any problems except for a minor quirk
when setting the
>POI folder. I had to swtich from directory to folder
view when entering
>the destination folder. If I didn't it reported that it
couldn't find
>the storage card, which I assume is related to it being
called compact
>flash under ks 7. Can I assume that I was sent the
right upgrade and
>don't need any extra files?
>
>I also was lead to believe that for 3.3 I need an extra
patch to get
>blue tooth to work? Sounds odd? Why ship something you
know needs a
>patch? It all seemed confused so I guess when it arrives
on Tuesday I'll
>find out.
>
>- Liam
>
>-----Original Message-----
>From: gps-talkusers-bounce freelists.org
>[mailto:gps-talkusers-bounce freelists.org] On Behalf Of
Michael May
>Sent: 29 January 2006 18:55
>To: GPS-talkusers-freelists.org
>Subject: [gps-talkusers] GPS 3.3 with Keysoft 7
>
>
>For those of you who have upgraded to Keysoft 7 on the
mPower or
>BrailleNote Classic, your GPS version 3.3 should
continue to work.
>You might have to reinstall it but everything will work
normally.
>
>Since GPS is under the "Navigation" menu under
Keysoft 7, it takes a
>while to get used to pressing N from the Main Menu
instead of G,
>which will now get you Games.
>
>On the PK with Keysoft 7, you will need a free GPS 3.3.1
version as
>the directory structure has changed on the PK to make it
the same as
>the mPower. Email your serial number for your PK to
>Sheila SenderoGroup.com for the 3.3.1 file.
>
>You will also notice slightly different behavior under
Keysoft 7 with
>regard to activating your Bluetooth GPS receiver. Under
Keysoft 6 on
>the mPower, you should be very familiar with 3 steps for
activating
>the receiver which are, Activate, Reset and Activate
again. Under
>Keysoft 7, it is no longer necessary to reset and
reactivate. All you
>have to do is to Activate Activesync once if you have
performed a reset.
>
>On the PK under KS6, you had to deactivate and
reactivate after doing
>a reset. Under KS7, once you do a reset, the PK is
already
>deactivated and you just have to activate it once.
>
>You may find that you need to pause at the Main menu for
5 seconds or
>so before pressing N for Navigation, otherwise you may
get a
>Bluetooth not connected message.
>
>A new Getting Started document has been adjusted with
these Keysoft 7
>connectivity details.
>
>Mike
>
>
>
>Michael G. May
>
>CEO Sendero Group
>
>Developers and distributors of BrailleNote GPS
>Distributing BrailleNote, VoiceNote, Miniguide, The
Tissot Silen-T
>tactile watch, and the ID Mate bar code reader
>
>MikeMay SenderoGroup.com
>http://www.SenderoGroup.c
om
>
>1-888-757-6810, Fax (530) 757-6830, Mobile (530)
304-0007
>Sendero Group, LLC
>1118 Maple Lane, Davis, CA 95616-1723, USA
>
>Latitude, 38 33 9.239 North
>Longitude, 121 45 40.145 West
|
|
| GPS 3.3 with Keysoft 7 |

|
2006-01-30 19:28:24 |
Mike
3.3 is arriving tomorrow so hopefully all will be well.
- Liam
-----Original Message-----
From: gps-talkusers-bounce freelists.org
[mailto:gps-talkusers-bounce freelists.org] On Behalf Of
Michael May
Sent: 29 January 2006 23:17
To: gps-talkusers freelists.org
Subject: [gps-talkusers] Re: GPS 3.3 with Keysoft 7
Liam,
There is no patch required. For the PK, there is just this
3.3.1,
which deals with some slightly different directory
procedures.
If you have a PK, send your SN to Sheila Senderogroup.com for the
3.3.1 GPS exe.
Mike
At 02:41 PM 1/29/2006, you wrote:
>Mike
>
>I've just installed ks7 on a PK with gps 3.1 already on
board. It
>installed without any problems except for a minor quirk
when setting
the
>POI folder. I had to swtich from directory to folder
view when
entering
>the destination folder. If I didn't it reported that it
couldn't find
>the storage card, which I assume is related to it being
called compact
>flash under ks 7. Can I assume that I was sent the
right upgrade and
>don't need any extra files?
>
>I also was lead to believe that for 3.3 I need an extra
patch to get
>blue tooth to work? Sounds odd? Why ship something you
know needs a
>patch? It all seemed confused so I guess when it arrives
on Tuesday
I'll
>find out.
>
>- Liam
>
>-----Original Message-----
>From: gps-talkusers-bounce freelists.org
>[mailto:gps-talkusers-bounce freelists.org] On Behalf Of
Michael May
>Sent: 29 January 2006 18:55
>To: GPS-talkusers-freelists.org
>Subject: [gps-talkusers] GPS 3.3 with Keysoft 7
>
>
>For those of you who have upgraded to Keysoft 7 on the
mPower or
>BrailleNote Classic, your GPS version 3.3 should
continue to work.
>You might have to reinstall it but everything will work
normally.
>
>Since GPS is under the "Navigation" menu under
Keysoft 7, it takes a
>while to get used to pressing N from the Main Menu
instead of G,
>which will now get you Games.
>
>On the PK with Keysoft 7, you will need a free GPS 3.3.1
version as
>the directory structure has changed on the PK to make it
the same as
>the mPower. Email your serial number for your PK to
>Sheila SenderoGroup.com for the 3.3.1 file.
>
>You will also notice slightly different behavior under
Keysoft 7 with
>regard to activating your Bluetooth GPS receiver. Under
Keysoft 6 on
>the mPower, you should be very familiar with 3 steps for
activating
>the receiver which are, Activate, Reset and Activate
again. Under
>Keysoft 7, it is no longer necessary to reset and
reactivate. All you
>have to do is to Activate Activesync once if you have
performed a
reset.
>
>On the PK under KS6, you had to deactivate and
reactivate after doing
>a reset. Under KS7, once you do a reset, the PK is
already
>deactivated and you just have to activate it once.
>
>You may find that you need to pause at the Main menu for
5 seconds or
>so before pressing N for Navigation, otherwise you may
get a
>Bluetooth not connected message.
>
>A new Getting Started document has been adjusted with
these Keysoft 7
>connectivity details.
>
>Mike
>
>
>
>Michael G. May
>
>CEO Sendero Group
>
>Developers and distributors of BrailleNote GPS
>Distributing BrailleNote, VoiceNote, Miniguide, The
Tissot Silen-T
>tactile watch, and the ID Mate bar code reader
>
>MikeMay SenderoGroup.com
>http://www.SenderoGroup.c
om
>
>1-888-757-6810, Fax (530) 757-6830, Mobile (530)
304-0007
>Sendero Group, LLC
>1118 Maple Lane, Davis, CA 95616-1723, USA
>
>Latitude, 38 33 9.239 North
>Longitude, 121 45 40.145 West
|
|
[1-2]
|
|