List Info

Thread: Pls help me to find answers..-Anu
Pls help me to find answers..-Anu
country flaguser name
United States		 2007-02-23 23:12:59 

  


  

    




  



    

            
pls help me to find answers..-Anu  


SECTION A
  
 
  
  
CISCO  ( 20 QUESTIONS )
  
 
  
      
 
 
Q1). Which of the following correctly describe IP RIP (Choose all that apply)? 

  
  
a)     ;    Administrative distance of 60
  
b)     ;    Distance vector
  
c)     ;    Administrative distance of 120
  
d)     ;    Load balancing
  
 
  
Q2). You are a junior network associate. Your network is running on Cisco gears. What are the four functional characteristics of the network layer of the OSI model? (Choose four) 

  
  
a)     ;    It uses broadcast addresses
  
b)     ;    It maintains routing tables
  
c)     ;    It uses a two-part address
  
d)     ;    It establishes network addresses
  
e)     ;    It provides media independence for upper layers
  
f)     ;     It provides path selection for lnternetwork communication
  
g)     ;    It provides access to the LAN media
  
 
  
Q3). You are a junior network associate. Your network is running on Cisco gears. In order to enable RIP, which tasks need to be performed (Choose all that apply)? 

  
  
a)     ;    specify directly connected subnets
  
b)     ;    specify the routing protocol
  
c)     ;    confound static RIP routes
  
d)     ;    specify directly connected networks 
  
 
  
Q4). Refer to the exhibit: 
 BRI: write_sid: wrote 6 for subunit 0, slot 1. 
 BRI: write_sid: wrote 8 for subunit 0, slot 1. 
 BRI: write_sid: wrote 11 for subunit 0, slot 1. 
 BRI: write_sid: wrote 13 for subunit 0, slot 1. 
 BRI: write_sid: wrote 29 for subunit 0, slot 1. 
 BRI: write_sid: wrote 1B for subunit 0, slot 1. 
 BRI: write_sid: wrote 15 for subunit 0, slot 1. 
 BRI: write_sid: wrote 17 for subunit 0, slot 1. 
 BRI: write_sid: wrote 20 for subunit 0, slot 1. 
 BRI: Starting Power Up timer for unit = 0. 
  
What command should you use to produce this console output (fill in the blank): 
  


  
  
       Please write in your answer in the blank below
  
 
  
       --------------------------------------------------------
  
 
  
Q5). What command should you use to find out information about the active lines on the switch, including the line number and the idle time (fill in the blank):
 

  
  
     
  
       Please write in your answer in the blank below
  
 
  
       --------------------------------------------------------
  
 
  
Q6). You run the following: Rout
 er(config-if)# ip access-group 101 in 
  
What has been achieved?
  


  
  
a)     ;    Connects access-list 0 inbound to interface 101
  
b)     ;    Connects access-list 101 inbound to interface 101
  
c)     ;    Connects access-list 101 inbound to interface e0
  
e)     ;    Connects access-list 101 to interface e0 bothbounds
  
 
  
Q7). You are a junior network associate. Your network is running on Cisco gears. What is required for two routers using IGRP to communicate their routes? 

  
  
a)     ;    Identical
 SID
  
b)     ;    Different network numbers
  
c)     ;    Different autonomous system numbers
  
d)     ;    Identical autonomous system number
  
 
  
Q8). You are a junior network associate. Your network is running on Cisco gears. Which three statements about common elements of the TCP/IP
 protocol stack are true? (Choose three) 

  
  
a)     ;    TCP enables devices to send large quantities of data using windowing in a connection oriented manner
  
b)     ;    UDP provides simple connectionless service without windowing or acknowledgments
  
c)     ;    APP enables devices to locate the IP address of local devices
  
d)     ;    IP provides connectionless service and routing capabilities
  
e)     ;    ICMP provides connection oriented management data to routers and Layer 3 switches
  
 
  
Q9). What do we call the communication mode that allows for transmission and reception of data simultaneously? 

  
  
a)           ;       full duplex
  
b)           ;       half duplex
  
c)           ;       complete duplex
  
d)           ;       none of the choices
  
e)           ;       simplex
  
 
  
Q10). You are a junior network associate. Your network is running on Cisco gears. Which of the following correctly describe the characteristics of IPX RIP? 

  
  
a)           ;       link state
  
b)           ;       distance vector
  
c)           ;       uses ticks and hop count as
  metric
  
d)           ;       60 second updates
  
e)           ;       30 second updates
  
 
  
Q11). What do we call the communication mode that allows for transmission and reception of data simultaneously? 

  
  
a)           ;       none of the choices
  
b)        &nbs
 p;       ;  full duplex
  
c)           ;       half duplex
  
d)           ;       simplex
  
e)           ;       complete duplex
  
 
  
Q12). What command should you use to copy a file from the flash memory to the second PC slot on the route processor card (fill in the blank): 

  
  
        Please write in your answer in the blank below
  
 
  
       ----------------------------------------------------------
  
Q13). You are a junior network associate. Your network is running on Cisco gears. Which of the following correctly describe the characteristics of IPX RIP? 

  
  
a)           ;       distance vector
  
b)           ;       60 second updates
  
c)           ;       link state
  
d)           ;       use ticks and hop count as metric
  
e)           ;       30 second updates
  
 
  
Q14). You are a junior network associate. Your network is running on Cisco gears. Which two steps are required to configure and apply standard access lists on an interface? (Choose two) 

  
  
a)     ;    copy the access list definition to each interface that will support it
  
b)     ;    define the number of access lists to be supported on an interface
  
c)     ;    enable an interface to become part of the access list group
  
d)     ;    define an access list number and its parameters
  
 
  
Q15). Which of the following best describes Convergence? 

 
 
  
a)     ;    Access method in which devices compete for permission to access the physical medium.
  
b)     ;    Speed and ability of a group of devices running a specific routing protocol to agree on the topology after a change in that topology.
  
c)     ;    Electrical techniques used to convey binary signals
  
d) &nbsp;   ; &nbsp;  A DTE through which commands are entered into a host.<
 /font>
  
 
  
Q16). Using a Bridge to segment the network can provide which of the following? 

  
  
a) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp;
 reliability
  
b) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; packet switching
  
c) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp;
 scalability
  
d) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; manageability
  
 
  
Q17). The default switching mode for a Catalyst 1900 is? 

  
  
a) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; store and forward
  
b) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; fragment free
  
c) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; store and hold
  
d) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; cut-through
  
 
  
Q18). Choose the correct command to copy a router's configuration from RAM to NVRAM. 

  
  
a) &nbsp;   ; &nbsp;  > copy running-config startup-config
  
b) &nbsp;   ; &nbsp;  # copy startup-config running-config
  
c) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; copy run start
  
d) &nbsp;   ; &nbsp;  > copy startup-config running-config
  
e) &nbsp;   ; &nbsp;  # copy running-config startup-config
  
 
  
Q19). You are the WAN Administrator for your company. How many types of ABR connections can you configure on your WAN
 switch? 

  
  
a) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; five
  
b) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; one 
  
c) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; four
  
d) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; two
  
e) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; three
  
f) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; &nbsp; none of the choices
  
 
  
Q20). Which of the following are NOT considered to be part of the Trunk Modules Card Group (Choose all that apply)? 

  
  
a) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; NTM
  
b) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; UXM
  
c) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; None of the choices
  
d) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; BTM
  
e) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; ALM/B
  
 
  
 
  
  
 
  
  
 
  
SECTION B
  
 
  
  
WINDOWS 2000 ( 20 QUESTIONS )
  
 
  
  
 
  
 
  
Q1). Roger is the security administrator for his company's Windows 2000 network. He has been directed by the CIO to increase the security on all member servers in the network without interfering with normal network communications between these servers and all other computers on the network. Roger has decided to accomplish this directive by applying one of the built-in Windows 2000 security templates. What template would be the best one for Roger to use and accomplish the goal of not interfering with network communications? 

  
  
a) &nbsp;   ; &nbsp;  hisecdc.inf
  
b) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; securedc.inf
  
c) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; basicsv.inf
  
d) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; hisecws.inf
  
e) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; securesv.inf
  
f) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; &nbsp; securews.inf
  
g) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; basicwk.inf
  
 
  
Q2). You want to make some security configuration changes to several of your OUs. What is the easiest way to apply these settings uniformly across all of your OUs? 

  
  
a) &nbsp;   ; &nbsp;  You should create and test a security template in Security Configuration and Analysis and then import it to a GPO linked to each of your OUs.
 
 
b) &nbsp;   ; &nbsp;  You should manually configure the required settings in the GPO that is already linked to each of your OUs.
  
c) &nbsp;   ; &nbsp;  You should use the Security Configuration and Analysis snap-in to apply the configured template to your OUs.
  
d) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; You should use the Automatic Updates feature in Service Pack 3 to apply the changes to all of 
  
your OUs.
  
 
  
Q3). You are the network administrator responsible for ensuring that all of your 500 Windows 2000 Professional clients have all required updates. What is the easiest way to gather security analysis information from all 500 client computers each week? 

  
  
a) &nbsp;   ; &nbsp;  You will have to visit each client locally.
  
b) &nbsp;   ; &nbsp;  You can run the Security Configuration and Analysis snap-in against the entire network.
  
c) &nbsp;   ; &nbsp;  You can write a script that uses the secedit command with the /analyze switch.
  
d) &nbsp;   ; &nbsp;  You can schedule Automatic Updates to provide you with notification of required updates.
  
 
  
Q4). Bruno need to configure his network to prevent users who are attempting to log on by guessing passwords will be prevented from gaining access. Bruno has proposed the following solutions to you, the security administrator, as those that he will implement on the network. 
 Which action or actions will not have any affect on preventing password guessing users from gaining access to Bruno's network? (Choose all that apply) 

  
  
a) &nbsp;   ; &nbsp;  Set the Account Lockout Threshold to 0 invalid login attempts
  
b) 

  &nbsp; &nbsp; &nbsp;  Set the Account Lockout Duration to 120 minutes
  
c) &nbsp;   ; &nbsp;  Set the Minimum Password Length to 15 characters
  
d) &nbsp;   ; &nbsp;  Set the Enforce Password History to 2 passwords
  
e) &nbsp;   ; &nbsp;  Set the Enable User Logon Restrictions setting to Enabled
  
 
  
Q5). You have several dozen ne
 twork users who travel with their portable computers. What can you do to protect their EFS encrypted data from being compromised if their computer is stolen while traveling? 

  
  
a) &nbsp;   ; &nbsp;  Require all users to use WEP128 for WLAN connections.
  
b) &nbsp;   ; &nbsp;  Export and delete the EFS recovery certificate from the portable computer.
  
c) &nbsp;   ; &nbsp;  Configure Group Policy for 0 cached logins.
  
d) &nbsp;   ; &nbsp;  Allow only IPSec to be used for VPN connections.
  
 
  
Q6). You have several Windows 2000 Professional computers that have been upgraded from Windows NT 4.0 Workstation. You cannot get the securews.inf template to take on any of these computers. What should you do first to correct this situation? 

  
  
a) &nbsp;   ; &nbsp;  Apply the desired settings by using a Windows NT 4.0 style System Policy.
  
b)&
 nbsp; ; &nbsp; &nbsp; &nbsp; Convert the file system to NTFS.
  
c) &nbsp;   ; &nbsp;  Apply the setup security.inf template to the computer.
  
d) &nbsp;   ; &nbsp;  Reinstall Windows 2000 Professional on the computer.
  
 
  
Q7). You want to perform an analysis of one of your member servers using the Security Configuration and Analysis snap-in. Put the following steps in the correct order. 
  
1. Right-click on Security Configuration and Analysis and select Open database.
 2. Select the security template to be used in the analysis.
 3. Right-click on Security Configuration and Analysis and select Configure computer now.
 4. Right-click on Security Configuration and Analysis and select Analyze computer now.
 5. Select the log file to be used in the analysis.
 6. Select the database to be used in the analysis.
  


  
  
a) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; 1,6,2,4,5
  
b) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; 2,6,4,3,1
  
c) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; 1,6,4,5,3
  
d) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; 2,1,3,6,4
  
e) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; 1,6,2,3,4
   
  
Q8). You have a mixed network, consisting of both Windows 2000 and Windows 98 clients. You have noticed that your Windows 98 computers are not receiving any of the Group Policy settings you have configured. What is the most likely reason for this? 

  
  
a) &nbsp;   ; &nbsp;  You have not configured the Windows 9x clients with the NTFS file system.
  
b) &nbsp;   ; &nbsp;  Windows 9x clients cannot have Group Policy settings applied to them.  
c) &nbsp;   ; &nbsp;  The Windows 9x clients are not on the same subnet as any Domain Controller.
  
d) &nbsp;   ; &nbsp;  The OU they are in is incorrectly configured.
  
 
  
Q9). You are attempting to configure SMB signing for your network but cannot get one of your clients to communicate to any other server or client now. What is the most likely reason for this? 

  
  
a) &nbsp;   ; &nbsp;  You do not have the same minimum setting configured on the client as you do on all other computers.
  
b) &nbsp;   ; &nbsp;  The installation on that client is
 corrupted.
  
c) &nbsp;   ; &nbsp;  The TCP/IP stack is hung on that client.
  
d) &nbsp;   ; &nbsp;  You do not have the same maximum setting configured on the client as you do on all other computers.
  
 
  
Q10). You are responsible for the security of 25 Windows 2000 IIS servers. What can you do to improve their security? 

  
  
a) &n
 bsp;   ; &nbsp;  Use the IISLockdown tool on them.
  
b) &nbsp;   ; &nbsp;  Move them into the Domain Controllers DC.
  
c) &nbsp;   ; &nbsp;  Remove them from the Active Directory domain.
  
d) &nbsp;   ; &nbsp;  Use the Clone Principal tool on them.
  
 
  
Q11). What is the name given to a large collection of fixes and updates tha
 t is issued irregularly and receives extensive testing? 

  
  
a) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; Hot Fix
  
b) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; Service Pack
  
c) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; FLOCK
  
d) &nbsp; &nbsp; &nbsp; &nbsp;   
 ; &nbsp; &nbsp; &nbsp; DLL
  
 
  
Q12). What is the name given to a small executable file that it issued to correct one specific problem or vulnerability? 

  
  
a) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; Service Pack
  
b) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; DLL
  
c) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; FLOCK
  
d) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; Hot Fix
  
 
  
Q13). You are responsible for monitoring 670 Windows 2000 computers for missing hot fixes. You want to perform this
 task from the command line in the most efficient manner possible. What can you? 

  
  
a) &nbsp;   ; &nbsp;  Visit each computer locally and run HFNetChk.
  
b) &nbsp;   ; &nbsp;  Use the IISLockdown tool from a central location.
  
c) &nbsp;   ; &nbsp;  Install and configure the Automatic Updates client and Software Update Servies.
  
d) &nbsp;   ; &nbsp;  Create a script 
 that runs HFNetChk from a central location against all of your computers.
  
 
  
Q14). You are responsible for the security configuration of 10 Domain Controllers, 15 SQL 2000 servers, 20 IIS 5.0 servers and 450 Windows 2000 Professional client computers. How many different security templates should you be using in your network? 

  
  
a) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; 4
  
b) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; 495
  
c) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; 2
  
d) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; 453
  
e) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; 1
  
 
  
Q15). Where can you go to locate the URLScan ISAPI filter once it has been installed? 

  
  
a) &nbsp;   ; &nbsp;  The properties page for the default Web site.
  
b) &nbsp;   ; &nbsp;  The properties page for the administration Web
 site.
  
c) &nbsp;   ; &nbsp;  The global properties page for the IIS server.
  
d) &nbsp;   ; &nbsp;  The properties page for the default FTP site.
  
 
  
Q16). You have 9 hot fixes that you need to deploy to 5 different servers. What is the easiest and safest way to deploy these hot fixes? 

  
  
a) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; IISLockdown
  
b) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; Install one at a time
  
c) &nbsp; &nbsp; &nbsp; 

  &nbsp; &nbsp; &nbsp; &nbsp;   URLScan
  
d) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; MBSA
  
e) &nbsp; &nbsp; &nbsp; &nbsp;   ; &nbsp; &nbsp; &nbsp; Qchain
  
 
  
Q17). You have 2000 Windows 2000 Professional clients that you are responsible for keeping updated with the latest hot fixes. What is the easiest way to accomplish this goal? You do not want any updates to be installed without your approval. (Choose all that apply) 

  
  
a) &nbsp;   ; &nbsp;  Manually visit each machine--it is the only sure way to get them all updated correctly.
  
b) &nbsp;   ; &nbsp;  Install and configure the Automatic Updates client on each of your client computers via their respective GPOs.
  
c) &nbsp;   ; &nbsp;  Create an "update" CD-ROM and distribute copies of it to each of your users as required.
  
d) &nbsp;   ; &nbsp;  Test and select
 updates for deployment.
  
e) &nbsp;   ; &nbsp;  Install and configure Software Update Services on one or more member servers.
  
Q18). You are the administrator for a small Windows 2000 Active Directory network consisting of two Domain Controllers and 15 Windows 2000 Professional clients. You have attempted to install the Software Update Services onto one of your two servers, but you cannot install it. What is the most likely reason why? 

  
  
a) &nbsp;   ; &nbsp;  SUS must be installed on a Domain
 Controller, you will need to install it on a Domain Controller.
  
b) &nbsp;   ; &nbsp;  The server you are attempting to install SUS on cannot contact a DNS server.
  
c) &nbsp;   ; &nbsp;  The server you are attempting to install SUS on cannot contact a Domain Controller.
  
d) &nbsp;   ; &nbsp;  SUS cannot be installed on a Domain Controller, you will need to install it on a member server.
  
 
  
Q19). You currently have a CD-ROM for Windows 2000 Professional Service Pack 2 that you have created a RIS installation image from. Your company has just purchased 200 new computers that you need to install Windows 2000 Service Pack 3 on. You will be installing these new clients via the Remote Installation Service. What should you do to minimize the number of steps required to get them installed with the correct Service Pack? 

  
  
a) &nbsp;   ; &nbsp;  Create a SP3 slipstream installation source on your RIS server.
  
b) &nbsp;   ; &nbsp;  Install the existing SP2 image and provide an upgrade CD-ROM for eac
 h computer that the end-user can run upon first boot.
  
c) &nbsp;   ; &nbsp;  Install the existing SP2 image and then install SP3 on each new computer from a CD-ROM.
  
d) &nbsp;   ; &nbsp;  Install the existing SP2 image and then use IntelliMirror to install the SP3 to all computers.
  
 
  
Q20). When attempting to run the MBSA tool on one
 of your servers, you are prompted to download and install a file. What is the purpose of this file? 

  
  
a) &nbsp;   ; &nbsp;  It is a recommended file that is used to delineate all computers on the network.
  
b) &nbsp;   ; &nbsp;  It is a recommended file that can produce detailed reports for you.
  
c) &nbsp;   ; &nbsp;  It is a required file that contains the list of updates available.
  
d) &nbsp;
  &nbsp; &nbsp; &nbsp; It is a required file that updates the MBSA core files.
  
 
  
  
 
  
  
 
  
SECTION C
  
 
  
WINDOWS NT-SERVER ( 20 QUESTIONS )
  
  
 
  
  
 
  
Q1). You are a network associate supporting your company's NT network. Your server us running a disk mirror setup. Disk 0
  is the MASTER disk and disk 1 is the SLAVE disk. Somehow disk 0 fails. You do not have a replacement disk handy. Which of the following should you do to get the server up and running quickly (Choose all that apply)? 
 
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Create a boot disk from another NT
 Server
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Replace disk 0 with the new disk
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Set the new disk to SLAVE
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Modify the boot.ini file on the floppy to point to the second device
  
e) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Change disk 1 to MASTER
  
f) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Boot the server from the boot disk 
  
 
  
Q2). You are a NT network consultant. You are working on the client's TCP/IP network. You are configuring IIS. You need to deploy SSL for your web site. You have configured the web server with the certificate. What has to be done on the client side? 
 

  
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Install a user certificate issued by the government
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Install a server certificate issued by your NT server
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Install the CA certificate on their Web
 browsers
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Install an access token certificate issued by a certificate authority 
  
e) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Generate an encryption key pair 
  
f) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Attach the key pair to the server certificate 
  
 
  
Q3). You are a network associate supporting your company's NT network. Your network consists of multiple sites connected by 512K links. The PDC is located in the central office in NY. Somehow the Boston users complain that the execution of their logon scripts involves a long delay. Which of the following should you do (Choose all that apply)? 
  
 
  
a) &nbsp;   ; &nbsp; &nbsp;&nbs
 p; &nbsp; Configure directory replication between the PDC and the clients
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Configure directory replication between the PDC and the BDC 
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Configure BDC in Boston
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  <
 /span>Configure PDC in Boston
  
 
  
Q4). You are the Network Administrator for your company. You want to create a network based on NT 4.0 domain structure. In this network there must be a server to authenticate users, a server to provide non-critical web service, and a server to provide non-critical file sharing. This network needs
 to support 1000 users. You need to achieve the following:
  
· &nbsp; &nbsp; &nbsp; &nbsp;  Create a NT domain 
  
· &nbsp; &nbsp; &nbsp; &nbsp;  Provide fault tolerance for the domain 
  
· &nbsp; &nbsp; &nbsp; &nbsp;  Provide load balancing for user authentication 
  
· &nbsp; &nbsp; &nbsp; &nbsp;  Provide optimized performance for file sharing
  
You do the following:
  
· &nbsp; &nbsp; &nbsp; &nbsp;  You install Windows NT Server on a computer. 
  
· &nbsp; &nbsp; &nbsp; &nbsp;  You designate that computer as the PDC.
 
  
· &nbsp; &nbsp; &nbsp; &nbsp;  You add BDCs to the domain.
  
Which of the following are achieved (Choose all that apply)?
  


 
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Provide fault tolerance for the domain
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Provide load balancing for user authentication
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Create a NT domain
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Provide optimized performance for file sharing
  
 
  
Q5). You are a network associate supporting your company's NT network. One day you receive a stop error in your PDC NT server saying that security audit cannot be
 generated: STOP: C0000244 {Audit Failed}. You restart the PDC and the same error comes out after 5 minutes. Which of the following are the valid ways to solve the problems without scarifying security (Choose all that apply)? 
 
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Increase the log file size. 
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Set the Event Log Wrapping for "Overwrite Events as Needed." 
  
c)&n
 bsp;   ; &nbsp; &nbsp; &nbsp; &nbsp; Disable auditing.
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Decrease the amount of information being audited. 
  
 
  
Q6). You are a NT network consultant. You are configuring the NT Server. You deploy the Security Configuration Tool Set based on MS recommendation. What registry will be checked by this tool? 
 
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionSeCEditRegValues
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  HKEY_LOCAL_MACHINEHARDWAREMicrosoftWindows NTCurrentVersionSeCEditRegValues
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTSeCEditRegValues
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionSeCEditRegSec
  
 
  
Q7). You are a NT network consultant. You are working on the client's TCP/IP network. You are configuring IIS. You need to deploy SSL for your web site. You have
 configured the web server with the certificate. What has to be done on the client side? 
 
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Install a server certificate issued by your NT server
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Install an access token certificate issued by a certificate authority 
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Install a user certificat
 e issued by the government
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Attach the key pair to the server certificate 
  
e) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Generate an encryption key pair 
  
f) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Install the CA certificate on
 their Web browsers
  
 
  
Q8). You are a network associate supporting your company's NT network. Your network consists of multiple sites connected by 512K links. The PDC is located in the central office in NY. Somehow the Boston users complain that the execution of their logon scripts involves a long delay. Which of the following should you do (Choose all that apply)? 
  
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Configure directory replication between the PDC and the clients
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Configure directory replication between the PDC and the BDC 
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Configure PDC in Boston
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Configure BDC in Boston
  
 
  
Q9). ) You are a network associate supporting your company's NT network. Your server us running a disk mirror setup. Disk 0 is the MASTER disk and disk 1 is the
 SLAVE disk. Somehow disk 0 fails. You do not have a replacement disk handy. Which of the following should you do to get the server up and running quickly (Choose all that apply)? 
 
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Replace disk 0 with the new disk
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Change disk 1 to MASTER
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Bo
 ot the server from the boot disk 
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Create a boot disk from another NT Server
  
e) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Set the new disk to SLAVE
  
f) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Modify the boot.ini file on the floppy to point to the second
 device
  
 
  
Q10). You are the Network Administrator for your company. You want to create a network based on NT 4.0 domain structure. In this network there must be a server to authenticate users, a server to provide non-critical web service, and a server to provide non-critical file sharing. This network needs to support 1000 users. You need to achieve the following:
  
· &nbsp; &nbsp; &nbsp; &nbsp;  Create a NT domain 
  
· &nbsp; &nbsp; &nbsp; &nbsp;  Provide fault tolerance for the domain 
  
· &nbsp; &nbsp; &nbsp; &nbsp;  Provide load balancing for user authentication 
  
· &nbsp; &nbsp; &nbsp; &nbsp;  Provide optimized performance for file sharing
  
You do the following:
  
· &nbsp; &nbsp; &nbsp; &nbsp;  You install Windows NT Server on a computer.

 
  
· &nbsp; &nbsp; &nbsp; &nbsp;  You designate that computer as the PDC. 
  
· &nbsp; &nbsp; &nbsp; &nbsp;  You add BDCs to the domain.
  
Which of the following are achieved (Choose all that apply)?
  
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Create a NT domain
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Provide load balancing for user authentication
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Provide fault tolerance for the domain
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Provide optimized performance for file sharing
  
 
  
Q11). You are a network associate supporting your company's NT network. One day you receive a stop error in your PDC<
 /st1> NT server saying that security audit cannot be generated: STOP: C0000244 {Audit Failed}. You restart the PDC and the same error comes out after 5 minutes. Which of the following are the valid ways to solve the problems without scarifying security (Choose all that apply)? 
 
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Increase the log file size. 
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Decrease the amount of information being audited. 
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Set the Event Log Wrapping for "Overwrite Events as Needed." 
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Disable
 auditing.
  
 
  
Q12). You are a NT network consultant. You are configuring the NT Server. You deploy the Security Configuration Tool Set based on MS recommendation. What registry will be checked by this tool? 
 
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTSeCEditRegValues
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionSeCEditRegValues
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  HKEY_LOCAL_MACHINEHARDWAREMicrosoftWindows NTCurrentVersionSeCEditRegValues
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows
 NTCurrentVersionSeCEditRegSec
  
 
  
Q13). You are a network associate supporting your company's NT network. Your server us running a disk mirror setup. Disk 0 is the MASTER disk and disk 1 is the SLAVE disk. Somehow disk 0 fails. You do not have a replacement disk handy. Which of the following should you do to get the server up and running quickly (Choose all that apply)? 
 
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Modify the boot.ini file
  on the floppy to point to the second device
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Change disk 1 to MASTER
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Replace disk 0 with the new disk
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Set the new disk to
 SLAVE
  
e) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Create a boot disk from another NT Server
  
f) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Boot the server from the boot disk 
  
 
  
Q14). You are a network associate supporting your company's NT network. One day you receive a stop error in your
 PDC NT server saying that security audit cannot be generated: STOP: C0000244 {Audit Failed}. You restart the PDC and the same error comes out after 5 minutes. Which of the following are the valid ways to solve the problems without scarifying security (Choose all that apply)? 
 
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Set the Event Log Wrapping for "Overwrite Events as Needed." 
 
 
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Increase the log file size. 
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Decrease the amount of information being audited. 
  
d) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Disable auditing.
  
 
 
 
Q15). You are a network associate supporting your company's NT network. Your network consists of multiple sites connected by 512K links. The PDC is located in the central office in NY. Somehow the Boston users complain that the execution of their logon scripts involves a long delay. Which of the following should you do (Choose all that apply)? 
 
 
  
a) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Configure PDC in
 Boston
  
b) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Configure BDC in Boston
  
c) &nbsp;   ; &nbsp; &nbsp; &nbsp;  Configure directory replication between the PDC and the BDC 
  
d) &nbsp; &
 nbsp; ; &nbsp; &nbsp; &nbsp;  Configure directory replication between the PDC and the clients