On 2008-05-26T23:09-0500, Travers Buda wrote:
> Bah, that's not right.  I've had too much coffee.  Does
not
> compile.  This does not compile either, but it's how
sparc64 does
> it (except sparc64 has it in files.sparc64.)

You were on the right track I think.  I put this in my
files.hppa:

device  hme: ether, ifnet, mii, ifmedia
file    dev/ic/hme.c                            hme
attach  hme at pci with hme_pci   
file    dev/pci/if_hme_pci.c                    hme_pci

Which compiled fine, although dmesg looks a little
confused:

"Sun PCIO EBus2" rev 0x01 at pci3 dev 0 function 0
not configured
hme0 at pci3 dev 0 function 1 "Sun HME" rev 0x01:
line 4 irq 2, address 08:00:20
:aa:dd:d8
ukphy0 at hme0 phy 1: Generic IEEE 802.3u media interface,
rev. 1: OUI 0x006051,
 model 0x0000
"Sun PCIO EBus2" rev 0x01 at pci3 dev 1 function 0
not configured
hme1 at pci3 dev 1 function 1 "Sun HME" rev 0x01:
line 5 irq 3, address 08:00:20
:aa:dd:d9
ukphy1 at hme1 phy 1: Generic IEEE 802.3u media interface,
rev. 1: OUI 0x006051,
 model 0x0000
"Sun PCIO EBus2" rev 0x01 at pci3 dev 2 function 0
not configured
hme2 at pci3 dev 2 function 1 "Sun HME" rev 0x01:
line 3 irq 5, address 08:00:20
:aa:dd:da
ukphy2 at hme2 phy 1: Generic IEEE 802.3u media interface,
rev. 1: OUI 0x006051,
 model 0x0000
"Sun PCIO EBus2" rev 0x01 at pci3 dev 3 function 0
not configured
hme3 at pci3 dev 3 function 1 "Sun HME" rev 0x01:
line 2 irq 6, address 08:00:20
:aa:dd:db
ukphy3 at hme3 phy 1: Generic IEEE 802.3u media interface,
rev. 1: OUI 0x006051,
 model 0x0000

They show up in ifconfig -a, I'll test later if they
actually work. 

Thanks for the help so far.

-- 
Stian Sletner