solutions

hehe - see "big brother" *is* watching LOL

-----Original Message-----
From: printerrepair%40yahoogroups.com">printerrepairyahoogroups.com
[mailto: printerrepair%40yahoogroups.com">printerrepairyahoogroups.com]On Behalf Of depotam
Sent: Tuesday, November 28, 2006 4:52 PM
To: printerrepair%40yahoogroups.com">printerrepairyahoogroups.com
Subject: [Laser Printer Repair] Re: solutions

All,

We have made some organizational changes over the last month; as such
we also needed to change the moderator of the forum.

We initially started with a forum that was not moderated, and this
allowed many posts that were not related to printer repair or
printers at all to be posted; hence the need to moderate.

We apologize for the delay over past month, we have made the
necessary changes to insure posts are moderated in a timely fashion.

--- In printerrepair%40yahoogroups.com">printerrepairyahoogroups.com, "Russ Blakeman&quot; <rhb57...>
wrote:
>
> If it gets bad enough that it's a problem we could always open a new
> un-moderated Yahoo group....I'm fine with this but it is an
alternative if
> it gets absolutely necessary.
>
>
>
> -----Original Message-----
> From: printerrepair%40yahoogroups.com">printerrepairyahoogroups.com
> [mailto: printerrepair%40yahoogroups.com">printerrepairyahoogroups.com]On Behalf Of Stéphane Patrick
> Sent: Monday, November 27, 2006 11:31 AM
> To: printerrepair%40yahoogroups.com">printerrepairyahoogroups.com
> Subject: [Laser Printer Repair] Re: solutions
>
>
> A weekend? No, it's more 2 or 3 weeks! :(
>
> --- In printerrepair%40yahoogroups.com">printerrepairyahoogroups.com, theofficeconnection wrote:
> >
> > I would assume ....................
> > .
> > the moderator took the weekend off as well
> > .
> > .
> > .
> > .
> > .
> > .
> > .
> >
> > On Fri, 17 Nov 2006 14:43:22 -0000 =?iso-8859-1?q?
> St=E9phane_Patrick?=
> > <spatrick_qc> writes:
> > > Hi!
> > >
> > > I hope this message will appear now! It's the 4 times I try to
> > > post!
> > >
> > >
> > > Lexmark 3100:
> > > Look in the slot for broken pins. I dont found any service
manual
> > > for
> > > a 3100, so the parts are probabely not available or you dont
give
> me
> > >
> > > the good model.
> > >
> > >
> > > Lexmark C750:
> > > Look the black Bellcrank (12G6445) if the peg is broken or the
> > > spring
> > > removed (56P0173) (look page 2-141 in the service manual)
> > >
> > > For the Shim, it's something you need to add if the frame is
> damage.
> > >
> > > Look page 3-17 for more info (you need the April 13 2006
revision)
> > >
> > >
> > > Lexmark C910:
> > > Didn't see this problem, but it's the RIP fan. 7-26 in the
> service
> > > manual.
> > >
> > >
> > > good luck all
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

Messages in this topic (8) Reply (via web post) | Start a new topic

.