Re: C# Support

Dear Daniel

 

Thanks for your support and readiness to help. Actually I wanted to implement using sipztapi but I could not get past the compilation on VS C++ 2005. Sadly the documentation is outdated and you get a lot of compile errors..once I solved those I started to get linkage errors. It might as well be something I did wrong, but honestly I spent 3 days on it and I could not get it to compile.

I think a new and updated manual is needed for Win compilation.

 

Thanks again J

 

 

 

Ali,

I have experience in working with the SipXTapiDotNet project, as C# was the preferred language for our client.  If you have any questions or need some guidance, please feel free to let me know and I'll try to help you out.

Good luck.

>Hi,
>
>Thursday, February 7, 2008, 8:49:46 AM, you wrote:
>
>>> I am interested in building a sip client around SipXtapi, my preferred
>>;> development language is C#
>;
>>; Yes, this is not a problem. Use .net interop and make your own sipXtapi .net
>> wrapper.
>
>Or use .net wrappers from sourceforge.net:
>SiXcli (C++/CLI & C#) - http://sourceforge.net/projects/sipxcli/
>SipXTapiDotNet (C#) - http://sourceforge.net/projects/sipxtapidotnet/
>
>
>--
>Best regards,
> sipx                             sipxxxxxxxxxxxxxxxx">mailto:sipxxxxxxxxxxxxxxxx

01C86FCB.3B295D70"> D2M Technologies

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.