Subclipse

We found the problem : SVN has to be activated on
SourceForge not only 
for the project but also for each user.

Thanks.

Jip


--

Dear Subclipse developers,

Following Mark's suggestions, I excluded username from the
URL. I also
switched to JavaSVN interface instead of JavaHL.

No success yet; I now get this error message:

mkdir -m "" https://svn.sourceforge.net/svnroot/bulkmailer/Mailer
    svn: MKACTIVITY of
'/svnroot/bulkmailer/!svn/act/0000010b547e6047':
403 Forbidden (https://svn.sourceforge.n
et)

Any hint to make it work ?

Jip

-- 
Jip Norguet
SourceForge BulkMailer Project Admin
jnorguetusers.sourceforge.net (jnorguetskynet.be)

-------- Original Message --------
Subject: 	Re: Subclipse
Date: 	Sat, 20 May 2006 17:57:24 -0700 (PDT)
From: 	Mark Phippard <markphipverizon.net>
Reply-To: 	Mark Phippard <markphipverizon.net>
To: 	Jean-Pierre Norguet <jnorguetskynet.be>



I'd do a couple of things:

1)  Do not include your username in the URL.  I see near the
end you
tried that, but stick with it.

2)  Clear any cached authentication data in Subversion.  It
basically is
just saying you are not authorized.  It could be that it has
cached
valid login credentials, so you do not get prompted for your
username
and password.

3)  In Eclipse preferences, Team -> SVN try changing the
client
adapter.  They both cache credentials in different places,
that would be
an easy way to take care of #2.  You should note, however,
that the
JavaSVN adapter has some problems working with SourceForge
repositories.  However, I do not think it has this
particular problem.
The basics should work OK.

Send any followups to userssubclipse.tigris.org only.

Thanks



----- Original Message ----
From: Jean-Pierre Norguet <jnorguetskynet.be>
To: cchabtigris.org; dbradbytigris.org; markphiptigris.org
Cc: Clay Lenhart <xclaylusers.sourceforge.net>;
Thoralf Gutierrez
<moxlotususers.sourceforge.net>
Sent: Saturday, May 20, 2006 8:28:07 PM
Subject: Subclipse

Dear Subclipse developers,

I am using Subclispe SVN Eclipse plugin 1.0.1 with Eclipse
3.1.2. I
experience problems using it to connect SourceForge SVN.

As specified on the SourceForge Web site;
The following configuration settings are used to access a
SourceForge.net-hosted SVN repository:

    * Hostname: svn.sourceforge.net
    * Port: 443
    * Protocol: HTTPS
    * Repository Path: /svnroot/PROJECTNAME (PROJECTNAME is
the
project's UNIX name)
    * Username: Your SourceForge.net username for SVN write
operations,
none will be requested otherwise.
    * Password: Your SourceForge.net user password for write
operations,
none will be requested otherwise.

I followed these settings but they do not work. Some error
message are
as follows:
    Filesystem has no item
svn: URL
'https://jnorguetsvn.sourceforge.net/svnroot/bulkmailer/Mailer'
non-existent in that revision

mkdir -m "Initial import."
https://jnorguetsvn.sourceforge.net/svnroot/bulkmailer/Mailer
    RA layer request failed
svn: MKACTIVITY of
'/svnroot/bulkmailer/!svn/act/dfd52456-e596-6c4e-8501-9cfcc
4024071': 403
Forbidden (https://svn.sourceforge.n
et)

    Filesystem has no item
svn: URL
'https://jnorguetsvn.sourceforge.net/svnroot/bulkmailer/Mailer'
non-existent in that revision

mkdir -m "Initial import."
https://jnorguetsvn.sourceforge.net/svnroot/bulkmailer/Mailer
    RA layer request failed
svn: MKACTIVITY of
'/svnroot/bulkmailer/!svn/act/0f29bf45-af25-c04d-8bb9-c69a8
394959b': 403
Forbidden (https://svn.sourceforge.n
et)

mkdir -m "" https://jnorguetsvn.sourceforge.net/svnroot/bulkmailer/Mailer
    RA layer request failed
svn: MKACTIVITY of
'/svnroot/bulkmailer/!svn/act/374880c1-0b16-d047-a3b9-08db7
0b00581': 403
Forbidden (https://svn.sourceforge.n
et)

mkdir -m "" https://jnorguetsvn.sourceforge.net/svnroot/bulkmailer/Mailer
    RA layer request failed
svn: MKACTIVITY of
'/svnroot/bulkmailer/!svn/act/c89e17f1-2375-6a47-bc8a-0b410
29910cf': 403
Forbidden (https://svn.sourceforge.n
et)

mkdir -m "" https://jnorguetsvn.sourceforge.net/svnroot/bulkmailer/Mailer
    RA layer request failed
svn: MKACTIVITY of
'/svnroot/bulkmailer/!svn/act/87e9cc93-278d-8d46-8a02-eebaf
692f3cd': 403
Forbidden (https://svn.sourceforge.n
et)

mkdir -m "" https://svn.sourceforge.net/svnroot/bulkmailer/Mailer
    RA layer request failed
svn: MKACTIVITY of
'/svnroot/bulkmailer/!svn/act/99804b88-aba4-b946-9c7a-de63e
cbfb450': 403
Forbidden (https://svn.sourceforge.n
et)


I tried various configurations, with no success. I checked I
activated
SVN for our SourceForge project.

Can this is a bug of Subclipse or did I do something wrong ?

In this case, I do not know how to connect SVN from Eclipse
otherwise.
Indeed, TortioseSVN does SVN but it is not integrated with
Eclipse.

Best regards,

Jip

-- 
SourceForge BulkMailer Project Admin
jnorguetusers.sourceforge.net (jnorguetskynet.be)

------------------------------------------------------------
---------
To unsubscribe, e-mail: users-unsubscribesubclipse.tigris.org
For additional commands, e-mail: users-helpsubclipse.tigris.org